CSHB0530R-100M Equivalent & Substitute Parts

Part Overview

The CSHB0530R-100M is a 10 µH shielded molded inductor manufactured by CODACA, designed for power choke applications in surface mount configurations. This component features a magnetic powder core with a current rating of 4.2 A and maximum DC resistance of 85 mOhm. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified based on matching electrical performance parameters, mechanical compatibility, and environmental certifications to ensure direct interchangeability in circuit applications.

Substiute Parts

CSHB0530R-100M

CODACAIn Stock: 1806CSHB0530R-100M Datasheet

Current PartRFQ

CSHB0530R-100M

CODACAIn Stock: 1806CSHB0530R-100M Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CSHB0530R-100M is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Inductance value: 10 µH
• Inductance tolerance: ±20%
• Current rating: 4.2 A minimum
• Saturation current (Isat): 3.85 A minimum
• DC resistance: 85 mOhm maximum

Mechanical Parameters:

• Mounting type: Surface Mount
• Package dimensions: 0.228" L x 0.205" W (5.80mm x 5.20mm)
• Height seated maximum: 0.118" (3.00mm)
• Core material: Magnetic Powder
• Shielding: Shielded configuration

Environmental & Compliance Parameters:

• Operating temperature range: -40°C ~ 125°C
• RoHS3 compliance required
• MSL rating: 1 (Unlimited)
• REACH unaffected status

Parts meeting all specified parameters within stated tolerances qualify as direct substitutes. The CSHB0530R-100M series designation indicates component family compatibility.

Parameter Comparison

Engineering Selection Recommendations

The CSHB0530R-100M maintains Active product status with continuous manufacturing availability. Component selection for this power choke application is based on the following engineering criteria:

Compliance & Regulatory: The part carries full RoHS3 compliance certification, meeting current environmental regulations for electronic component manufacturing. REACH unaffected status confirms no restricted substances of concern. MSL 1 rating indicates unlimited shelf life without moisture-related degradation concerns.

Electrical Performance: The 10 µH inductance with ±20% tolerance and 4.2 A current rating establishes the functional specification for power choke applications. The 3.85 A saturation current and 85 mOhm maximum DC resistance define the operating envelope. These parameters must be matched exactly in substitute components to maintain circuit performance.

Mechanical Compatibility: Surface mount configuration with nonstandard package dimensions (5.80mm x 5.20mm x 3.00mm maximum height) requires physical verification during board layout. The shielded molded construction with magnetic powder core provides electromagnetic containment suitable for noise-sensitive applications.

Operational Environment: The -40°C to 125°C operating temperature range accommodates industrial and commercial applications. Substitutes must maintain identical temperature specifications to ensure reliability across the full operating envelope.

Frequently Asked Questions (FAQ)

Q: What defines a direct substitute for the CSHB0530R-100M?

A: A direct substitute must match all electrical parameters (10 µH inductance, 4.2 A current rating, 3.85 A Isat, 85 mOhm DCR maximum), mechanical dimensions (5.80mm x 5.20mm x 3.00mm maximum height), core material (magnetic powder), shielding configuration, surface mount mounting type, and environmental certifications (RoHS3 compliance, MSL 1, REACH unaffected status).

Q: Can I use a different inductance value as a substitute?

A: No. The 10 µH inductance value is a critical electrical parameter. Substitutes must maintain this exact inductance specification within the ±20% tolerance band. Different inductance values will alter circuit performance and are not acceptable substitutes.

Q: Are there current rating considerations for substitution?

A: Yes. Substitute components must support a minimum current rating of 4.2 A with saturation current (Isat) of 3.85 A or higher. Lower current ratings will result in premature saturation and component failure. Higher current ratings are acceptable but may affect physical dimensions or cost.

Q: What is the significance of the nonstandard package designation?

A: The nonstandard package indicates this component uses a proprietary form factor specific to the CSHB0530R series. Physical dimensions (5.80mm x 5.20mm x 3.00mm maximum height) must be verified for PCB footprint compatibility. Substitutes must maintain identical package dimensions to ensure mechanical fit.

Q: Does the shielded configuration affect substitution?

A: Yes. The shielded molded inductor design provides electromagnetic containment. Unshielded alternatives will not provide equivalent noise suppression and are not acceptable substitutes. The shielding configuration must be maintained.

Q: What is the importance of RoHS3 compliance in substitution?

A: RoHS3 compliance is a regulatory requirement for components used in regulated markets. Substitute components must carry identical RoHS3 certification. Non-compliant alternatives create regulatory risk and are not acceptable for production use.

Q: Can I substitute based on similar DC resistance values?

A: No. The 85 mOhm maximum DC resistance is a specified parameter that must be matched. While similar resistance values may appear functionally equivalent, only components meeting the exact 85 mOhm maximum specification qualify as direct substitutes.

Q: What does MSL 1 (Unlimited) mean for storage and handling?

A: MSL 1 indicates unlimited shelf life without moisture sensitivity concerns. This component does not require special dry storage conditions or baking procedures prior to assembly. Standard warehouse storage conditions are acceptable.

Q: Is the 100 kHz inductance test frequency critical for substitution?

A: Yes. The inductance value of 10 µH is measured at 100 kHz. Substitute components must have inductance specifications measured at the same frequency to ensure accurate electrical equivalence.

Q: Can I use components from different manufacturers as substitutes?

A: Substitutes must match all specified electrical and mechanical parameters regardless of manufacturer. However, only components meeting the complete parameter specification—including current rating, saturation current, DC resistance, physical dimensions, shielding, core material, and environmental certifications—qualify as direct substitutes.