CSHB0430R-5R6M Equivalent & Substitute Parts

Part Overview

The CSHB0430R-5R6M is a shielded molded inductor manufactured by CODACA, classified as a power choke for surface mount applications. This component features a 5.6 µH inductance value with a 6 A current rating and is designed for use in power conversion and filtering circuits. The part maintains Active product status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental ratings to ensure direct functional equivalence in circuit applications.

Substiute Parts

CSHB0430R-5R6M

CODACAIn Stock: 1969CSHB0430R-5R6M Datasheet

Current PartRFQ

CSHB0430R-5R6M

CODACAIn Stock: 1969CSHB0430R-5R6M Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CSHB0430R-5R6M are identified through strict parametric matching across the following critical specifications:

Electrical Parameters:

• Inductance value of 5.6 µH with ±20% tolerance
• Current rating of 6 A minimum
• Saturation current (Isat) of 5.5 A or greater
• DC resistance (DCR) not exceeding 58.5 mOhm

Mechanical Parameters:

• Surface mount molded inductor construction
• Shielded core design
• Magnetic powder core material
• Nonstandard package dimensions: 0.173" L x 0.165" W (4.40 mm x 4.20 mm)
• Maximum seated height of 0.118" (3.00 mm)

Environmental & Compliance Parameters:

• Operating temperature range of -40°C to 125°C
• RoHS3 compliance
• REACH unaffected status
• Moisture sensitivity level 1 (unlimited)
• Tape & Reel packaging format

Parts meeting all specified parameters are classified as direct parametric equivalents and may be substituted without circuit redesign.

Parameter Comparison

Engineering Selection Recommendations

The CSHB0430R-5R6M maintains Active product status with full regulatory compliance across RoHS3 and REACH frameworks. The identified substitute part CSHB0430R-5R6M demonstrates complete parametric alignment with the main part specification, including identical electrical ratings, mechanical dimensions, and environmental certifications.

Selection of substitute components should be based on:

Compliance Verification: Confirm that the substitute part carries identical RoHS3 compliance and REACH unaffected designation for applications subject to regulatory requirements.

Inventory & Lead Time: Evaluate component availability and procurement timelines through authorized distributors to support production schedules.

Electrical Performance: Verify that the substitute part's inductance value, current rating, and DC resistance specifications meet circuit design requirements within the specified tolerance band.

Mechanical Fit: Confirm that the nonstandard package dimensions (0.173" L x 0.165" W, 3.00 mm max height) are compatible with PCB layout and assembly equipment specifications.

Environmental Conditions: Ensure that the operating temperature range (-40°C to 125°C) and moisture sensitivity level (MSL 1) align with the intended application environment.

Frequently Asked Questions (FAQ)

Q: What defines a substitute part for the CSHB0430R-5R6M?

A: A substitute part must match all critical electrical parameters (5.6 µH inductance, 6 A current rating, 58.5 mOhm max DCR), mechanical specifications (nonstandard 4.40 mm x 4.20 mm x 3.00 mm max), core material (magnetic powder), shielding type, and environmental ratings (-40°C to 125°C). The part must also maintain RoHS3 compliance and REACH unaffected status.

Q: Can the CSHB0430R-5R6M be replaced with a different inductance value?

A: No. The 5.6 µH inductance value is a critical electrical parameter. Substitution is limited to parts with identical inductance specifications within the ±20% tolerance band. Different inductance values require circuit redesign and are not considered direct substitutes.

Q: Are there any package compatibility considerations?

A: Yes. The CSHB0430R-5R6M uses a nonstandard surface mount package with specific dimensions of 0.173" L x 0.165" W and 0.118" max height. Substitute parts must match these exact dimensions to ensure PCB footprint compatibility and assembly equipment compatibility.

Q: What is the significance of the 5.5 A saturation current rating?

A: The saturation current (Isat) of 5.5 A indicates the maximum current level before the inductor core saturates and inductance degrades. This parameter must be met or exceeded in substitute parts to maintain performance under peak current conditions in the application circuit.

Q: Does the shielded design affect substitution criteria?

A: Yes. The CSHB0430R-5R6M is specified as a shielded inductor, which reduces electromagnetic interference. Substitute parts must also feature shielded construction to maintain EMI performance characteristics in the circuit.

Q: What is the importance of the 100 kHz inductance test frequency?

A: The inductance value of 5.6 µH is measured at 100 kHz. Substitute parts must have inductance specifications verified at the same test frequency to ensure accurate electrical performance matching.

Q: Are there any moisture sensitivity considerations for storage or handling?

A: The CSHB0430R-5R6M carries an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions. Substitute parts with identical MSL 1 rating require no special moisture control during storage or handling.

Q: Can this inductor be used in applications exceeding 6 A?

A: No. The 6 A current rating is the maximum continuous current specification. Operation above this rating risks component damage and performance degradation. Applications requiring higher current ratings require different component selection.