CSD2410F Equivalent & Substitute Parts

Part Overview

The CSD2410F is a solid-state relay (SSR) manufactured by Sensata-Crydom, configured as a SPST-NO (Single Pole Single Throw - Normally Open) device with a 10A load capacity and operating voltage range of 24V to 280V AC. This component features a hockey puck form factor with quick connect termination and is designed for chassis mount applications.

The CSD2410F is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain system functionality and ensure continued availability for new designs, repairs, and production continuity.

Substiute Parts

CSD2410F

Sensata-CrydomIn Stock: 1147CSD2410F Datasheet

Current PartRFQ

CSW2410F

Sensata-CrydomIn Stock: 831CSW2410F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CSD2410F is based on electrical and mechanical parameter compatibility. The following criteria determine valid substitutes:

Critical Parameters for Substitution:

• Circuit configuration must remain SPST-NO (1 Form A)
• Load voltage range must encompass or match 24V ~ 280V AC
• Load current rating must be 10A or greater
• Output type must be AC with zero cross functionality
• Package form factor must be hockey puck
• Termination style must be quick connect 0.187"/0.250"
• Mounting compatibility must support chassis mount applications

The CSW2410F meets all substitution criteria while offering enhanced input voltage flexibility and active product status.

Parameter Comparison

Engineering Selection Recommendations

The CSW2410F is the direct substitute for the CSD2410F. Both components are manufactured by Sensata-Crydom and share identical electrical specifications for load voltage, load current, circuit configuration, and output characteristics.

The CSW2410F offers the following advantages:

• Active Product Status: The CSW2410F maintains active production status, ensuring long-term availability and supply chain continuity.
• RoHS Compliance: The CSW2410F is RoHS compliant, meeting environmental and regulatory requirements for new designs and manufacturing.
• Extended Input Voltage Range: The CSW2410F accepts input voltage from 3V to 32VDC, compared to the CSD2410F range of 3.5V to 15VDC, providing greater design flexibility.
• Expanded Mounting Options: The CSW2410F supports both chassis mount and panel mount configurations, whereas the CSD2410F is limited to chassis mount.

All electrical and mechanical parameters critical to system function remain equivalent between the two parts.

Frequently Asked Questions (FAQ)

Q: Can the CSW2410F directly replace the CSD2410F in existing applications?

A: Yes. The CSW2410F is a direct substitute. Both components share identical load voltage ranges (24V ~ 280V AC), load current ratings (10A), circuit configuration (SPST-NO), output type (AC, zero cross), package form factor (hockey puck), and termination style (quick connect 0.187"/0.250"). Physical and electrical compatibility is maintained.

Q: What is the difference in input voltage specifications between these parts?

A: The CSD2410F accepts input voltage from 3.5V to 15VDC. The CSW2410F accepts input voltage from 3V to 32VDC. The CSW2410F provides a wider input voltage operating range, allowing operation at lower minimum voltages and higher maximum voltages. Applications operating within the CSD2410F range will function identically with the CSW2410F.

Q: Are there mounting differences between the CSD2410F and CSW2410F?

A: The CSD2410F is specified for chassis mount only. The CSW2410F supports both chassis mount and panel mount configurations. Both parts maintain the same hockey puck form factor and quick connect termination. Existing chassis mount installations require no modification.

Q: Is the CSW2410F RoHS compliant?

A: Yes. The CSW2410F is RoHS compliant. The CSD2410F RoHS status is not specified in available documentation.

Q: Why is the CSD2410F listed as obsolete?

A: The CSD2410F has been discontinued by the manufacturer. The CSW2410F is the active replacement part and is recommended for all new designs and procurement.