CSBL2212-101M Equivalent & Substitute Parts

Part Overview

The CSBL2212-101M is a high Q value SMD power inductor manufactured by CODACA. This shielded wirewound inductor is designed for surface mount applications requiring 100 µH inductance with a current rating of 6.1 A and maximum DC resistance of 40.8 mOhm. The component features a metal composite core with flat wire construction and is rated for automotive applications under AEC-Q200 standards.

The part is currently in active production status with 949 pieces available in stock. Substitute part identification becomes necessary when addressing supply chain continuity, inventory management, or specific application requirements within the defined electrical and mechanical parameter space.

Substiute Parts

CSBL2212-101M

CODACAIn Stock: 975CSBL2212-101M Datasheet

Current PartRFQ

CSBL2212-101M

CODACAIn Stock: 975CSBL2212-101M Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CSBL2212-101M is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Inductance value: 100 µH
• Inductance tolerance: ±20%
• Current rating: 6.1 A minimum
• Saturation current (Isat): 9 A minimum
• DC resistance: 40.8 mOhm maximum

Mechanical & Physical Parameters:

• Type: Wirewound construction
• Core material: Metal Composite
• Shielding: Shielded configuration
• Mounting type: Surface Mount
• Package dimensions: 22.50 mm L × 22.00 mm W × 12.40 mm H (seated max)
• Package format: Nonstandard

Environmental & Compliance Parameters:

• Operating temperature range: -50°C to 150°C
• AEC-Q200 automotive rating
• RoHS3 compliance
• Moisture Sensitivity Level: 1 (Unlimited)
• Packaging: Tape & Reel (TR)

A part qualifies as a direct substitute only when all electrical specifications, physical dimensions, core material composition, shielding type, and compliance certifications match the CSBL2212-101M within the stated tolerances.

Parameter Comparison

Engineering Selection Recommendations

The CSBL2212-101M is an active production component with full AEC-Q200 automotive qualification and ROHS3 compliance. The substitute part identified (CSBL2212-101M) is parametrically identical across all electrical, mechanical, and environmental specifications.

Selection of this substitute part is appropriate for applications requiring:

• 100 µH inductance with ±20% tolerance
• Surface mount wirewound inductor with metal composite core
• Shielded configuration for EMI suppression
• Current handling capability of 6.1 A continuous with 9 A saturation rating
• Automotive-grade reliability under AEC-Q200 standards
• Operation across -50°C to 150°C temperature range
• RoHS3 and REACH compliance

The identical part number and specifications indicate direct interchangeability without circuit redesign or PCB layout modification. Tape & Reel packaging ensures compatibility with standard automated assembly processes.

Frequently Asked Questions (FAQ)

Q: What makes CSBL2212-101M a direct substitute for itself?

A: The substitute part carries the identical manufacturer part number, series designation, and all electrical and mechanical specifications. All parameters including inductance, current rating, DC resistance, core material, shielding type, dimensions, and compliance certifications are identical to the main part.

Q: Are there any differences in the electrical performance between the main part and substitute?

A: No. Both parts are specified with 100 µH inductance at ±20% tolerance, 6.1 A current rating, 9 A saturation current, and 40.8 mOhm maximum DC resistance. Inductance is tested at 100 kHz for both parts.

Q: Can this inductor be used in automotive applications?

A: Yes. The CSBL2212-101M carries AEC-Q200 automotive qualification, making it suitable for automotive-grade circuit designs requiring high reliability standards.

Q: What is the significance of the metal composite core material?

A: The metal composite core provides the specified inductance value with the high Q value characteristic noted in the product description. This core material is integral to the electrical performance and cannot be substituted with alternative core materials without affecting inductance and Q factor.

Q: Is the shielded configuration important for substitution?

A: Yes. The shielded design is a critical specification. Unshielded inductors have different electromagnetic field characteristics and would not provide equivalent EMI suppression performance. Substitutes must maintain the shielded configuration.

Q: What does the nonstandard package designation mean?

A: The nonstandard package indicates that the 22.50 mm × 22.00 mm × 12.40 mm (seated max) footprint does not conform to industry standard package outlines. PCB layout and component placement must be designed specifically for this exact dimensional specification.

Q: Can this part be hand-soldered or must it use reflow soldering?

A: The Tape & Reel packaging format indicates this component is designed for automated assembly with reflow soldering processes. Hand soldering is not recommended for surface mount components in this package format.

Q: What is Moisture Sensitivity Level 1 (Unlimited)?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity restrictions. The part can be stored and handled without special moisture control measures or baking requirements prior to soldering.

Q: Are there any temperature derating considerations?

A: The operating temperature range is -50°C to 150°C. Applications operating at the upper temperature limit should account for potential changes in inductance and DC resistance characteristics within the specified tolerances.

Q: How does the ±20% inductance tolerance affect circuit design?

A: The ±20% tolerance means the actual inductance value can range from 80 µH to 120 µH. Circuit designs must accommodate this tolerance range in frequency response, filtering, or impedance matching calculations.