CSBL2212-100M Equivalent & Substitute Parts

Part Overview

The CSBL2212-100M is a high Q value shielded wirewound SMD power inductor manufactured by CODACA. This component is designed for surface mount applications requiring 10 µH inductance with a 21 A current rating and metal composite core construction. The part is currently in active production status with AEC-Q200 automotive qualification and ROHS3 compliance. Alternative equivalent parts are identified to support procurement flexibility, supply chain continuity, and design redundancy in applications where the primary part number becomes unavailable or inventory constraints exist.

Substiute Parts

CSBL2212-100M

CODACAIn Stock: 1107CSBL2212-100M Datasheet

Current PartRFQ

CSBL2212-100M

CODACAIn Stock: 1107CSBL2212-100M Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CSBL2212-100M is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Inductance value: 10 µH
• Inductance tolerance: ±20%
• Current rating: 21 A minimum
• Saturation current (Isat): 31 A minimum
• DC resistance (DCR): 3.88 mOhm maximum
• Core material: Metal Composite
• Shielding: Shielded construction required

Mechanical Parameters:

• Mounting type: Surface Mount
• Package case: Nonstandard
• Physical dimensions: 0.886" L x 0.866" W (22.50mm x 22.00mm)
• Height seated maximum: 0.488" (12.40mm)
• Wire construction: Flat Wire

Environmental & Compliance Parameters:

• Operating temperature range: -50°C ~ 150°C
• Ratings: AEC-Q200 qualification
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

Packaging:

• Format: Tape & Reel (TR)

Only components meeting all specified parameters across electrical, mechanical, environmental, and compliance categories qualify as direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The CSBL2212-100M is an active production component with full AEC-Q200 automotive qualification and ROHS3 compliance. The part carries unlimited moisture sensitivity level (MSL 1), indicating no special handling requirements during storage or assembly. REACH unaffected status confirms compliance with European chemical regulations.

For applications requiring this 10 µH shielded wirewound inductor with 21 A current rating and metal composite core construction, the CSBL2212-100M from CODACA is the specified equivalent. The part's active production status ensures ongoing availability and supply chain stability.

Selection of this component is appropriate for power conversion circuits, DC-DC converters, and filtering applications operating within the -50°C to 150°C temperature range. The flat wire construction and high Q value characteristics support efficient energy transfer and reduced losses in high-frequency switching applications at the 100 kHz test frequency.

Frequently Asked Questions (FAQ)

Q: What makes CSBL2212-100M a direct substitute for itself?

A: The CSBL2212-100M is identified as a parametric equivalent because it meets all electrical, mechanical, environmental, and compliance specifications required for this application category. The part number, inductance value, current rating, DC resistance, core material, shielding configuration, physical dimensions, temperature range, and regulatory certifications are identical across all instances.

Q: Are there any differences in the substitute part compared to the main part?

A: No. The substitute part listed is the CSBL2212-100M from CODACA, which is identical to the main part across all specified parameters. Both parts carry the same manufacturer designation, electrical ratings, mechanical dimensions, and compliance certifications.

Q: What are the critical parameters that must match for substitution?

A: Substitution requires exact matching of inductance (10 µH), inductance tolerance (±20%), current rating (21 A), saturation current (31 A), DC resistance (3.88 mOhm maximum), core material (metal composite), shielding (shielded), mounting type (surface mount), physical dimensions (0.886" L x 0.866" W, 12.40mm height maximum), operating temperature range (-50°C to 150°C), and compliance ratings (AEC-Q200, ROHS3, REACH unaffected).

Q: Does the nonstandard package case affect substitution compatibility?

A: The nonstandard package case is a defined specification for this component series. Substitutes must maintain identical physical dimensions and mounting footprint: 0.886" L x 0.866" W (22.50mm x 22.00mm) with maximum seated height of 0.488" (12.40mm). Tape & Reel packaging format must also be maintained.

Q: What is the significance of the flat wire construction?

A: Flat wire construction is a specified feature of the CSBL2212-100M that contributes to its high Q value performance. Substitutes must incorporate identical flat wire design to maintain electrical performance characteristics and thermal properties in the target application.

Q: Is AEC-Q200 qualification required for all substitutes?

A: Yes. AEC-Q200 automotive qualification is a mandatory specification for this component. All substitutes must carry identical AEC-Q200 ratings to ensure compliance with automotive reliability and quality standards.

Q: What does MSL 1 (Unlimited) mean for handling and storage?

A: Moisture Sensitivity Level 1 indicates unlimited shelf life with no special moisture control requirements during storage or handling. The component does not require dry-pack storage or baking procedures prior to assembly, simplifying logistics and manufacturing processes.

Q: Can this inductor be used in applications outside the -50°C to 150°C range?

A: The CSBL2212-100M is specified for operation within -50°C to 150°C. Applications requiring operation outside this temperature range require alternative component selection with extended temperature specifications.

Q: What is the significance of the 100 kHz inductance test frequency?

A: The 100 kHz test frequency is the standard measurement condition at which the 10 µH inductance value and high Q characteristics are verified. This frequency is typical for power conversion and switching applications where this inductor is commonly deployed.