CSAD0880-220M Equivalent & Substitute Parts

Part Overview

The CSAD0880-220M is a 22 µH shielded molded inductor manufactured by CODACA, designed for surface mount applications requiring moderate current handling and compact form factor. This component is rated for 3.5 A continuous current with a saturation current of 5 A, featuring an alloy powder core and maximum DC resistance of 89.2 mOhm. The part maintains Active product status and is RoHS3 compliant with unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct interchangeability in circuit designs.

Substiute Parts

CSAD0880-220M

CODACAIn Stock: 1808CSAD0880-220M Datasheet

Current PartRFQ

CSAD0880-220M

CODACAIn Stock: 1808CSAD0880-220M Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CSAD0880-220M are identified through parametric equivalence matching. The critical parameters that determine substitution eligibility are:

Electrical Parameters:

• Inductance value: 22 µH
• Inductance tolerance: ±20%
• Current rating: 3.5 A minimum
• Saturation current: 5 A minimum
• DC resistance: 89.2 mOhm maximum
• Core material: Alloy powder

Mechanical Parameters:

• Package type: 4-SMD, J-Lead
• Mounting type: Surface mount
• Dimensions: 9.60 mm x 9.60 mm x 9.50 mm (maximum height)
• Shielding: Shielded configuration

Compliance Parameters:

• RoHS3 compliance required
• Operating temperature range: -40°C to 125°C minimum
• Moisture sensitivity: MSL 1 or better

Parts meeting all specified parameters within the defined tolerances are classified as direct equivalents and substitutes.

Parameter Comparison

Engineering Selection Recommendations

The CSAD0880-220M is an active product with full RoHS3 compliance and REACH unaffected status, making it suitable for current and future production applications. When selecting equivalent or substitute parts, the following criteria apply:

Compliance Verification: All substitute parts must maintain ROHS3 compliance and REACH unaffected status to ensure regulatory alignment with the original component specification.

Product Status: Only active product status parts are recommended for new designs and ongoing production. Obsolete or discontinued parts introduce supply chain risk.

Electrical Performance: Substitute parts must match the specified inductance value of 22 µH within the ±20% tolerance band. Current rating and saturation current specifications must meet or exceed the 3.5 A and 5 A requirements respectively. DC resistance must not exceed 89.2 mOhm to maintain circuit performance characteristics.

Mechanical Compatibility: The 4-SMD, J-Lead package with 9.60 mm x 9.60 mm x 9.50 mm dimensions is a critical constraint for PCB layout and assembly compatibility. Substitute parts must conform to these exact specifications.

Environmental Specifications: Operating temperature range of -40°C to 125°C and MSL 1 rating must be maintained to ensure reliability across intended application environments.

Frequently Asked Questions (FAQ)

Q: What makes a part a direct equivalent to the CSAD0880-220M?

A: A direct equivalent must match all electrical parameters (22 µH inductance, 3.5 A current rating, 5 A saturation current, 89.2 mOhm maximum DCR), core material (alloy powder), shielding configuration, package type (4-SMD, J-Lead), physical dimensions (9.60 mm x 9.60 mm x 9.50 mm), and compliance certifications (RoHS3, REACH unaffected).

Q: Can I use a part with different inductance tolerance?

A: No. The ±20% tolerance specification is a defined parameter. Substitute parts must maintain this tolerance band to ensure circuit performance consistency.

Q: Are there any restrictions on package substitution?

A: Yes. The 4-SMD, J-Lead package is specific to this component family. Substitutes must use the identical package type and footprint to ensure PCB compatibility without redesign.

Q: What is the significance of the MSL 1 rating?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture control requirements. Substitute parts must maintain this rating or better to avoid additional storage and handling procedures.

Q: Does the shielding requirement affect substitution options?

A: Yes. The shielded configuration is a specified parameter. Unshielded inductors are not acceptable substitutes, as shielding affects electromagnetic interference characteristics in the circuit.

Q: How does the 100 kHz test frequency relate to substitution?

A: The 100 kHz test frequency is the standard measurement condition for this inductance value. Substitute parts must be characterized at this frequency to ensure specification accuracy and circuit performance.

Q: What compliance certifications must substitute parts maintain?

A: Substitute parts must maintain RoHS3 compliance and REACH unaffected status. These certifications ensure regulatory compliance for manufacturing and end-use applications.

Q: Is product status important when selecting substitutes?

A: Yes. Only active product status parts are recommended. Active status ensures ongoing availability, manufacturer support, and supply chain reliability for production applications.