CS45-16IO1R Equivalent & Substitute Parts

Part Overview

The CS45-16IO1R is a 1.6 kV, 75 A standard recovery SCR (Silicon Controlled Rectifier) manufactured by IXYS in ISOPLUS247™ packaging. This thyristor is designed for high-voltage switching applications requiring reliable gate-triggered control in through-hole configurations. The part maintains active product status with 1658 units in current inventory. Substitute parts are identified when electrical parameters and mechanical compatibility align with application requirements, enabling component sourcing flexibility while maintaining circuit performance specifications.

Substiute Parts

CS45-16IO1R

IXYSIn Stock: 1721CS45-16IO1R Datasheet

Current PartRFQ

CS45-16IO1

IXYSIn Stock: 1416CS45-16IO1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CS45-16IO1R is determined by strict equivalence across the following critical parameters:

• Off-state voltage rating: 1.6 kV
• Gate trigger voltage (Vgt) maximum: 1.5 V
• Gate trigger current (Igt) maximum: 100 mA
• On-state voltage (Vtm) maximum: 1.64 V
• RMS on-state current (It RMS) maximum: 75 A
• Hold current (Ih) maximum: 100 mA
• Off-state leakage current maximum: 5 mA
• Non-repetitive surge current: 520 A (50 Hz) / 560 A (60 Hz)
• Operating temperature range: -40°C to 140°C
• Mounting configuration: Through-hole
• Package type: TO-247-3
• Recovery type: Standard Recovery

The CS45-16IO1 qualifies as a parametric equivalent based on identical electrical specifications and compatible packaging within the TO-247 family.

Parameter Comparison

Engineering Selection Recommendations

Both CS45-16IO1R and CS45-16IO1 maintain active product status and ROHS3 compliance. Selection between these parts is based on packaging variant availability and supply chain considerations. The CS45-16IO1R uses ISOPLUS247™ packaging, while CS45-16IO1 uses TO-247AD packaging. Both variants are mechanically compatible with TO-247-3 footprints and deliver identical electrical performance across all specified parameters. Component selection should prioritize current inventory levels and lead-time requirements, as electrical substitution is complete.

Frequently Asked Questions (FAQ)

Q: Can CS45-16IO1 replace CS45-16IO1R in existing designs?

A: Yes. All electrical parameters, thermal ratings, and mechanical mounting specifications are identical. The packaging variant difference (ISOPLUS247™ versus TO-247AD) does not affect circuit compatibility when both use TO-247-3 footprints.

Q: What is the difference between ISOPLUS247™ and TO-247AD packaging?

A: Both are TO-247-3 case variants. ISOPLUS247™ and TO-247AD represent different supplier designations for mechanically and electrically equivalent packages. Pin configuration and thermal performance remain unchanged.

Q: Are there any compliance differences between these parts?

A: No. Both parts carry identical RoHS3 compliance, REACH unaffected status, and EAR99 export classification. Moisture sensitivity level is 1 (Unlimited) for both variants.

Q: What parameters must remain constant for substitution?

A: Off-state voltage (1.6 kV), gate trigger specifications (Vgt 1.5 V max, Igt 100 mA max), on-state voltage (1.64 V max), RMS current rating (75 A), hold current (100 mA), and operating temperature range (-40°C to 140°C) must all match exactly.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes, provided the PCB footprint accommodates TO-247-3 mounting. Both parts use identical pin assignments and through-hole mounting configuration.