CS14713_HB-2X2MX-W Equivalent & Substitute Parts

Part Overview

The CS14713_HB-2X2MX-W is a clear acrylic lens manufactured by Ledil, designed for use with high-power LED arrays from leading manufacturers including Cree, Lumileds, Nichia, and Osram. This lens features a square form factor with flat top design, accommodating 4 LEDs with a viewing angle of 39° to 57° in a wide optical pattern. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this specific optical performance envelope.

Substiute Parts

CS14713_HB-2X2MX-W

LedilIn Stock: 768CS14713_HB-2X2MX-W Datasheet

Current PartRFQ

CS15759_HB-2X2MX-8-W

LedilIn Stock: 1177CS15759_HB-2X2MX-8-W Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CS14713_HB-2X2MX-W is determined by the following critical parameters that must align across equivalent parts:

Primary Compatibility Criteria:

• Lens size: 90mm x 90mm (fixed mechanical envelope)
• Number of LEDs: 4 (optical array configuration)
• Mounting type: Screw (mechanical interface)
• Material: Acrylic (optical and environmental properties)
• Optical pattern: Wide (beam distribution characteristic)

Secondary Compatibility Criteria:

• Viewing angle range overlap or compatibility with target application
• Regulatory compliance: ROHS3 and REACH status
• Moisture sensitivity level: MSL 1 (unlimited shelf life)

The identified substitute CS15759_HB-2X2MX-8-W maintains all primary compatibility criteria. The viewing angle specification differs (43° ~ 63° versus 39° ~ 57°), representing a shift in the optical performance envelope. This substitute is classified as active product status, ensuring ongoing availability and supply chain support.

Parameter Comparison

Engineering Selection Recommendations

For Direct Substitution:

The CS15759_HB-2X2MX-8-W is the identified equivalent for the obsolete CS14713_HB-2X2MX-W. Both parts maintain identical mechanical compatibility (90mm x 90mm form factor, 4-LED configuration, screw mounting) and material specification (acrylic). Both parts carry ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for applications in restricted markets.

Key Differences Requiring Application Assessment:

The viewing angle specification differs between the two parts. The CS14713_HB-2X2MX-W provides 39° ~ 57° coverage, while the CS15759_HB-2X2MX-8-W provides 43° ~ 63° coverage. This represents a 4° increase in minimum angle and a 6° increase in maximum angle. The lens style designation also differs (flat top versus multiple top), indicating a geometric variation in the optical surface profile.

Supply Chain Consideration:

The CS15759_HB-2X2MX-8-W is classified as active product status with higher current inventory (1078 pcs versus 693 pcs for the obsolete part). This ensures long-term availability and supply continuity for new designs and production requirements.

Frequently Asked Questions (FAQ)

Q: Can the CS15759_HB-2X2MX-8-W be used as a direct replacement for the CS14713_HB-2X2MX-W?

A: The CS15759_HB-2X2MX-8-W maintains all critical mechanical and material specifications required for physical and optical compatibility. The viewing angle range differs by 4° to 6° across the specification envelope. Application compatibility depends on whether the target optical performance falls within the 43° ~ 63° range of the substitute part.

Q: What are the mechanical compatibility requirements?

A: Both parts share identical mechanical specifications: 90mm x 90mm lens size, 4-LED configuration, screw mounting type, and acrylic material. These parameters ensure interchangeability in mechanical mounting and thermal management contexts.

Q: Are there regulatory compliance differences between the two parts?

A: Both parts carry identical regulatory certifications: ROHS3 compliance, REACH unaffected status, and MSL 1 (unlimited moisture sensitivity level). No compliance barriers exist for substitution in regulated applications.

Q: What is the significance of the lens style difference (flat top versus multiple top)?

A: The lens style designation indicates a geometric variation in the optical surface profile. The CS14713_HB-2X2MX-W features a flat top design, while the CS15759_HB-2X2MX-8-W features a multiple top design. This difference contributes to the viewing angle specification variance and may affect beam uniformity characteristics.

Q: How does the viewing angle difference affect application suitability?

A: The CS15759_HB-2X2MX-8-W provides a wider viewing angle range (43° ~ 63°) compared to the CS14713_HB-2X2MX-W (39° ~ 57°). Applications requiring the narrower 39° ~ 42° range or the narrower 57° ~ 63° range may experience performance variations. Applications operating within the overlapping 43° ~ 57° range will experience equivalent optical performance.

Q: What packaging differences exist between these parts?

A: The CS14713_HB-2X2MX-W is supplied with unspecified packaging, while the CS15759_HB-2X2MX-8-W is supplied in tray packaging. This difference affects handling, storage, and logistics considerations but does not impact functional compatibility.

Q: Is the CS15759_HB-2X2MX-8-W compatible with the same LED manufacturers?

A: The CS15759_HB-2X2MX-8-W is specified for use with Bridgelux, Citizen, Cree, Lumileds, Nichia, and Samsung LED sources. The original CS14713_HB-2X2MX-W is specified for Cree, Lumileds, Nichia, and Osram. The substitute part supports a broader manufacturer compatibility list, including all manufacturers supported by the original part.