CS06352-24M Equivalent & Substitute Parts

Part Overview

The CS06352-24M is a 24 MHz crystal oscillator manufactured by NDK America, Inc., designed for surface mount applications requiring fundamental mode operation. This component features a 12pF load capacitance, 50 Ohms equivalent series resistance, and operates across the -30°C to 85°C temperature range. The part is classified as obsolete, making identification of compatible substitute components essential for ongoing system support and new design implementations.

Substiute Parts

CS06352-24M

NDK America, Inc.In Stock: 12432CS06352-24M Datasheet

Current PartRFQ

Q 24,0-JXS22-12-10/15-T1-FU-WA-LF

Jauch QuartzIn Stock: 3791Q 24,0-JXS22-12-10/15-T1-FU-WA-LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CS06352-24M is determined by strict equivalence across the following critical parameters:

• Frequency: Must be 24 MHz (exact match required)
• Load Capacitance: Must be 12pF (exact match required)
• ESR: Must be 50 Ohms (exact match required)
• Package / Case: Must be 4-SMD, No Lead (exact match required)
• Physical Dimensions: Must be 0.098" L x 0.079" W (2.50mm x 2.00mm) (exact match required)
• Operating Mode: Must be Fundamental (exact match required)
• Mounting Type: Must be Surface Mount (exact match required)

The substitute part Q 24,0-JXS22-12-10/15-T1-FU-WA-LF from Jauch Quartz meets all critical substitution criteria. While the substitute exhibits improved frequency tolerance (±10ppm versus ±15ppm) and an extended lower operating temperature limit (-40°C versus -30°C), these represent enhancements rather than deviations from the original specification.

Parameter Comparison

Engineering Selection Recommendations

The Q 24,0-JXS22-12-10/15-T1-FU-WA-LF from Jauch Quartz is a direct substitute for the obsolete CS06352-24M. The substitute maintains all critical electrical and mechanical parameters while offering improved specifications in frequency tolerance and extended lower temperature operation. The substitute part carries Active product status, ensuring continued availability and supply chain reliability. Both components meet RoHS compliance requirements, with the substitute meeting the more stringent ROHS3 standard. The maximum seated height difference of 0.002" (0.05mm) is negligible for standard PCB assembly processes and does not impact circuit board layout or component clearance considerations.

Frequently Asked Questions (FAQ)

Q: Can the Q 24,0-JXS22-12-10/15-T1-FU-WA-LF be used as a direct replacement for the CS06352-24M?

A: Yes. Both components share identical frequency (24 MHz), load capacitance (12pF), ESR (50 Ohms), package type (4-SMD, No Lead), physical dimensions (0.098" L x 0.079" W), and operating mode (Fundamental). The substitute meets or exceeds all electrical and mechanical requirements of the original part.

Q: What are the differences between these two parts?

A: The substitute offers three enhancements: improved frequency tolerance (±10ppm versus ±15ppm), extended lower operating temperature limit (-40°C versus -30°C), and Active product status versus Obsolete. The maximum seated height differs by 0.002" (0.05mm), which is within standard PCB assembly tolerances.

Q: Are there any compatibility concerns with PCB assembly?

A: No. Both components use identical 4-SMD, No Lead packaging and share the same footprint dimensions (0.098" L x 0.079" W / 2.50mm x 2.00mm). The 0.002" height difference does not affect reflow soldering, component placement, or clearance requirements.

Q: Does the substitute meet environmental and compliance standards?

A: Yes. The substitute is ROHS3 Compliant and maintains MSL 1 (Unlimited) moisture sensitivity rating, matching or exceeding the original part's compliance profile.

Q: Is the substitute part currently available?

A: Yes. The Q 24,0-JXS22-12-10/15-T1-FU-WA-LF carries Active product status with documented inventory availability, whereas the CS06352-24M is classified as Obsolete.