CRL2010-JW-R150ELF Equivalent & Substitute Parts

Part Overview

The CRL2010-JW-R150ELF is a 150 mOhms ±5% thick film chip resistor in 2010 (5025 Metric) package format, rated for 0.75W power dissipation. Manufactured by Bourns Inc., this component is classified as Active product status. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component requirements, enabling direct replacement in applications where the primary part becomes unavailable or when alternative sourcing is required.

Substiute Parts

CRL2010-JW-R150ELF

Bourns Inc.In Stock: 822CRL2010-JW-R150ELF Datasheet

Current PartRFQ

RMCF2010JTR150

Stackpole Electronics IncIn Stock: 5850RMCF2010JTR150 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CRL2010-JW-R150ELF are qualified based on the following criteria:

• Identical resistance value: 150 mOhms
• Matching tolerance: ±5%
• Equivalent power rating: 0.75W
• Identical package format: 2010 (5025 Metric)
• Matching composition: Thick Film
• Temperature coefficient within specification: ±200ppm/°C
• Compatible operating temperature range (minimum -55°C to 125°C)
• Identical physical dimensions and height
• ROHS3 compliance and MSL 1 rating

The RMCF2010JTR150 from Stackpole Electronics Inc. meets all electrical and mechanical parameters. The extended operating temperature range (-55°C ~ 155°C) and AEC-Q200 automotive qualification represent enhanced capabilities that do not restrict substitution in standard applications.

Parameter Comparison

Engineering Selection Recommendations

Both the CRL2010-JW-R150ELF and RMCF2010JTR150 are Active product status components with full ROHS3 compliance and MSL 1 rating. The RMCF2010JTR150 carries AEC-Q200 automotive qualification, which indicates enhanced reliability screening and is suitable for automotive and high-reliability applications. The extended operating temperature range of the Stackpole part (-55°C ~ 155°C versus -55°C ~ 125°C) provides additional thermal margin in demanding environments. Selection between these parts should consider packaging requirements: the Bourns part is supplied in Tape & Reel format, while the Stackpole alternative is available in Cut Tape format.

Frequently Asked Questions (FAQ)

Q: Can RMCF2010JTR150 directly replace CRL2010-JW-R150ELF in existing designs?

A: Yes. Both parts share identical electrical specifications (150 mOhms ±5%, 0.75W), composition (Thick Film), temperature coefficient (±200ppm/°C), and mechanical dimensions (2010 package, 5.00mm x 2.50mm). The RMCF2010JTR150 meets or exceeds all baseline requirements.

Q: What is the difference in packaging between these parts?

A: The CRL2010-JW-R150ELF is supplied in Tape & Reel (TR) format, while the RMCF2010JTR150 is supplied in Cut Tape (CT) format. Both formats are compatible with standard pick-and-place assembly equipment; selection depends on production volume and handling requirements.

Q: Does the extended temperature range of the RMCF2010JTR150 affect compatibility?

A: No. The extended operating range (-55°C ~ 155°C versus -55°C ~ 125°C) represents enhanced capability and does not restrict use in applications designed for the original part's temperature range.

Q: Are both parts RoHS compliant?

A: Yes. Both the CRL2010-JW-R150ELF and RMCF2010JTR150 are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What does AEC-Q200 qualification on the Stackpole part indicate?

A: AEC-Q200 is an automotive industry standard qualification that certifies the component has undergone enhanced reliability testing and screening. This qualification does not restrict use in non-automotive applications and indicates higher reliability margins.