CRCW20105R60FNTF Equivalent & Substitute Parts

Part Overview

The CRCW20105R60FNTF is a 5.6 Ohm ±1% 0.75W chip resistor manufactured by Vishay Dale in the 2010 (5025 Metric) package format. This thick film resistor is designed for automotive applications and meets AEC-Q200 qualification standards. The part is currently active in production with 966 units available in stock. Equivalent and substitute parts are identified to provide design flexibility, supply chain alternatives, and compliance options for applications requiring this specific resistance value and power rating.

Substiute Parts

CRCW20105R60FNTF

Vishay DaleIn Stock: 1069CRCW20105R60FNTF Datasheet

Current PartRFQ

RC2010FK-075R6L

YAGEOIn Stock: 3212RC2010FK-075R6L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CRCW20105R60FNTF are qualified based on the following critical parameters:

• Resistance value: 5.6 Ohms
• Tolerance: ±1%
• Power rating: 0.75W
• Package format: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Termination count: 2
• Moisture sensitivity level: 1

The RC2010FK-075R6L from YAGEO meets all electrical and mechanical specifications required for direct substitution. Both parts share identical resistance, tolerance, power rating, package dimensions, and thermal characteristics. The primary difference is the feature set: the Vishay Dale part carries AEC-Q200 automotive qualification, while the YAGEO part features moisture-resistant construction.

Parameter Comparison

Engineering Selection Recommendations

The CRCW20105R60FNTF is the primary choice for automotive applications requiring AEC-Q200 qualification. The RC2010FK-075R6L serves as a functional equivalent for non-automotive applications or where RoHS3 compliance is required. The YAGEO part offers superior moisture resistance and modern RoHS compliance, making it suitable for consumer and industrial applications. Both parts are electrically and mechanically interchangeable within the specified parameter ranges. The height difference of 0.002" (0.05mm) between the two parts is negligible for standard PCB assembly processes.

Frequently Asked Questions (FAQ)

Q: Can RC2010FK-075R6L replace CRCW20105R60FNTF in automotive applications?

A: The RC2010FK-075R6L is electrically and mechanically compatible but lacks AEC-Q200 automotive qualification. Use only in non-automotive applications or where automotive qualification is not required.

Q: Are the package dimensions identical?

A: Both parts use the 2010 (5025 Metric) package with identical length and width (5.00mm x 2.50mm). The seated height differs by 0.05mm (YAGEO is 0.65mm vs. Vishay Dale at 0.70mm), which is within standard PCB assembly tolerances.

Q: What is the difference in RoHS compliance?

A: The CRCW20105R60FNTF is RoHS non-compliant. The RC2010FK-075R6L is ROHS3 compliant, meeting current environmental regulations for new designs.

Q: Are the electrical specifications identical?

A: Yes. Both parts have 5.6 Ohm resistance at ±1% tolerance, 0.75W power rating, ±200ppm/°C temperature coefficient, and -55°C ~ 155°C operating range.

Q: Which part should I select for new designs?

A: For automotive applications, use CRCW20105R60FNTF. For consumer and industrial applications, RC2010FK-075R6L is preferred due to RoHS3 compliance and moisture-resistant construction.