CRCW201014R0FKTF Equivalent & Substitute Parts

Part Overview

The CRCW201014R0FKTF is a 14 Ohm ±1% 0.75W thick film chip resistor in 2010 (5025 Metric) package manufactured by Vishay Dale. This component is rated for automotive applications under AEC-Q200 standard with an operating temperature range of -55°C to 155°C. The part is currently active in production. Substitute parts are necessary when the primary part experiences supply constraints, inventory limitations, or when design requirements permit alternative qualified manufacturers meeting identical electrical and mechanical specifications.

Substiute Parts

CRCW201014R0FKTF

Vishay DaleIn Stock: 1125CRCW201014R0FKTF Datasheet

Current PartRFQ

CRCW201014R0FKEF

Vishay DaleIn Stock: 12301CRCW201014R0FKEF Datasheet

DirectRFQ

ERJ-12SF14R0U

Panasonic Electronic ComponentsIn Stock: 2944ERJ-12SF14R0U Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CRCW201014R0FKTF are qualified based on matching the following critical parameters:

• Resistance value: 14 Ohms
• Tolerance: ±1%
• Power rating: 0.75W
• Package: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• Physical dimensions and height specifications

Two substitute parts meet these criteria: CRCW201014R0FKEF (Vishay Dale) and ERJ-12SF14R0U (Panasonic Electronic Components). Both parts are electrically and mechanically equivalent to the primary part and are suitable for direct substitution in applications requiring identical performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

CRCW201014R0FKEF is the primary substitute option. This part is manufactured by Vishay Dale, the same manufacturer as the primary part, and carries ROHS3 compliance with REACH Unaffected status. Current inventory availability is 12,252 pieces.

ERJ-12SF14R0U is a secondary substitute manufactured by Panasonic Electronic Components. This part is rated as "Not For New Designs" and carries ROHS3 compliance with REACH Unaffected status. Current inventory availability is 2,930 pieces. This part is suitable for replacement applications and legacy design support only.

The primary part CRCW201014R0FKTF is RoHS non-compliant and REACH Affected. Current inventory is 1,038 pieces.

Frequently Asked Questions (FAQ)

Q: Can CRCW201014R0FKEF be used as a direct replacement for CRCW201014R0FKTF?

A: Yes. Both parts are manufactured by Vishay Dale and share identical electrical specifications (14 Ohms ±1%, 0.75W), temperature characteristics (±100ppm/°C, -55°C to 155°C), package dimensions (2010/5025 Metric), and AEC-Q200 automotive qualification. The parts are mechanically and electrically interchangeable.

Q: What is the difference between CRCW201014R0FKTF and CRCW201014R0FKEF?

A: The primary difference is RoHS compliance status. CRCW201014R0FKEF is ROHS3 compliant and REACH Unaffected, while CRCW201014R0FKTF is RoHS non-compliant and REACH Affected. All other electrical and mechanical parameters are identical.

Q: Can ERJ-12SF14R0U replace CRCW201014R0FKTF in new designs?

A: ERJ-12SF14R0U meets all electrical and mechanical specifications for substitution. However, this part carries a "Not For New Designs" status from Panasonic. Use this part only for replacement or legacy design applications where the primary and preferred substitute are unavailable.

Q: Are all three parts compatible with the same PCB layout?

A: Yes. All three parts use the 2010 (5025 Metric) package with identical physical dimensions (0.197" L x 0.098" W, 5.00mm x 2.50mm) and maximum seated height (0.028" / 0.70mm). PCB footprints and assembly processes are identical.

Q: What are the key parameters that determine substitutability for this resistor?

A: Substitutability is determined by matching resistance value (14 Ohms), tolerance (±1%), power rating (0.75W), package type (2010), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C to 155°C), and AEC-Q200 automotive qualification. All substitute parts meet these criteria.