CRCW1206110KFKEB Equivalent & Substitute Parts

Part Overview

The CRCW1206110KFKEB is a 110 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Vishay Dale. This component is rated for automotive applications under AEC-Q200 standard with an operating temperature range of -55°C to 155°C. The part is currently active in production with 1094 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative packaging formats are required for manufacturing processes, or when design requirements necessitate components from different manufacturers while maintaining identical electrical and mechanical specifications.

Substiute Parts

CRCW1206110KFKEB

Vishay DaleIn Stock: 1119CRCW1206110KFKEB Datasheet

Current PartRFQ

CRCW1206110KFKEA

Vishay DaleIn Stock: 14396CRCW1206110KFKEA Datasheet

DirectRFQ

ERJ-8ENF1103V

Panasonic Electronic ComponentsIn Stock: 43185ERJ-8ENF1103V Datasheet

DirectRFQ

RMCF1206FG110K

Stackpole Electronics IncIn Stock: 4298RMCF1206FG110K Datasheet

DirectRFQ

RMCF1206FT110K

Stackpole Electronics IncIn Stock: 1639RMCF1206FT110K Datasheet

DirectRFQ

KTR18EZPF1103

Rohm SemiconductorIn Stock: 1103KTR18EZPF1103 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW1206110KFKEB is determined by strict equivalence across the following parameters:

• Resistance value: 110 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C
• Automotive compliance: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

All substitute parts listed maintain these electrical and mechanical specifications. Differences in packaging format (Tape & Reel vs. Cut Tape) and product status do not affect functional equivalence. Physical dimensions may vary within acceptable tolerances (height seated maximum ranges from 0.024" to 0.028"), which is acceptable for standard PCB assembly processes.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (Active Status, Same Manufacturer): CRCW1206110KFKEA is the preferred direct substitute from Vishay Dale. It maintains identical electrical specifications and AEC-Q200 automotive compliance. The only difference is packaging format (Cut Tape & Digi-Reel vs. Tape & Reel), which does not affect component performance. This part has higher inventory availability (14,291 units).

Secondary Selection (Active Status, Alternative Manufacturers): RMCF1206FG110K and RMCF1206FT110K from Stackpole Electronics Inc are functionally equivalent alternatives. Both are active products with full AEC-Q200 compliance and ROHS3 certification. Physical height is 0.028" (0.70mm) compared to 0.024" (0.60mm) for the primary part, which remains within standard PCB assembly tolerances.

KTR18EZPF1103 from Rohm Semiconductor is an active product with identical specifications. This part includes high voltage capability as an additional feature. Height is 0.026" (0.65mm), intermediate between other options.

Not Recommended for New Designs: ERJ-8ENF1103V from Panasonic Electronic Components is marked "Not For New Designs" and should be used only for legacy system maintenance or repair applications where continuity with existing assemblies is required.

Frequently Asked Questions (FAQ)

Q: Can I substitute CRCW1206110KFKEA for CRCW1206110KFKEB in production? A: Yes. Both parts are from Vishay Dale with identical electrical and mechanical specifications. The difference is packaging format only. CRCW1206110KFKEA uses Cut Tape & Digi-Reel packaging while CRCW1206110KFKEB uses Tape & Reel. Both are suitable for automated PCB assembly.

Q: Are Stackpole and Rohm parts fully compatible with Vishay Dale parts? A: Yes. RMCF1206FG110K, RMCF1206FT110K, and KTR18EZPF1103 meet all electrical specifications (110 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C to 155°C) and carry AEC-Q200 automotive certification. Physical dimensions vary slightly in height (0.026" to 0.028" vs. 0.024"), which is acceptable for standard PCB assembly processes.

Q: Why is ERJ-8ENF1103V marked "Not For New Designs"? A: This designation indicates the manufacturer has discontinued active development for this part. It remains available for existing applications but should not be selected for new product designs. Use active alternatives instead.

Q: What is the significance of the packaging format difference? A: Tape & Reel and Cut Tape & Digi-Reel are different supply formats for automated assembly. Tape & Reel is continuous packaging on a reel, while Cut Tape & Digi-Reel is pre-cut tape on a reel. Both are compatible with standard pick-and-place equipment. Selection depends on your assembly line configuration and inventory management preferences.

Q: Do all substitute parts have the same moisture sensitivity level? A: Yes. All listed parts have MSL 1 (Unlimited), meaning they have unlimited shelf life under normal storage conditions and do not require special moisture control during handling or storage.

Q: Are all parts ROHS3 compliant? A: Yes. All parts listed are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic components.