CRCW08058R25FNTA Equivalent & Substitute Parts

Part Overview

The CRCW08058R25FNTA is an 8.25 Ohm ±1% 0.125W (1/8W) chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This thick film resistor is designed for automotive applications and meets AEC-Q200 qualification standards. The part is currently active in production. Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and design requirements across different manufacturing sources.

Substiute Parts

CRCW08058R25FNTA

Vishay DaleIn Stock: 976CRCW08058R25FNTA Datasheet

Current PartRFQ

RMCF0805FT8R25

Stackpole Electronics IncIn Stock: 15221RMCF0805FT8R25 Datasheet

DirectRFQ

RC0805FR-078R25L

YAGEOIn Stock: 35425RC0805FR-078R25L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CRCW08058R25FNTA are qualified based on the following critical parameters:

• Electrical Specifications: Resistance value (8.25 Ohms), tolerance (±1%), power rating (0.125W), and temperature coefficient (±200ppm/°C) must be identical
• Package Compatibility: 0805 (2012 Metric) package with 2 terminations ensures PCB footprint and assembly compatibility
• Operating Range: Temperature range of -55°C ~ 155°C must be maintained
• Composition: Thick film construction maintains electrical performance characteristics
• Moisture Sensitivity: MSL 1 rating ensures handling and storage compatibility

The identified substitutes meet all these criteria and are available from alternative manufacturers, providing equivalent electrical and mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

RMCF0805FT8R25 (Stackpole Electronics Inc): This substitute provides direct electrical and mechanical equivalence with ROHS3 compliance. The seated height of 0.026" (0.65mm) is within acceptable PCB assembly tolerances for 0805 packages. Suitable for applications where RoHS3 compliance is required.

RC0805FR-078R25L (YAGEO): This substitute meets all electrical specifications and offers ROHS3 compliance with moisture-resistant thick film construction. The seated height of 0.024" (0.60mm) provides optimal PCB clearance. Recommended for applications requiring moisture resistance and RoHS3 compliance.

CRCW08058R25FNTA (Vishay Dale): Original part maintains AEC-Q200 automotive qualification. RoHS non-compliant status should be evaluated against specific application requirements and regulatory constraints.

Frequently Asked Questions (FAQ)

Q: Can RMCF0805FT8R25 and RC0805FR-078R25L be used interchangeably with CRCW08058R25FNTA?

A: Yes, both substitutes meet the critical electrical parameters (8.25 Ohms ±1%, 0.125W, ±200ppm/°C, -55°C ~ 155°C) and package specifications (0805, 2 terminations). Height variations (0.50mm, 0.65mm, 0.60mm) are within standard PCB assembly tolerances for this package class.

Q: What is the primary difference between these three parts?

A: The main differences are manufacturer source, RoHS compliance status, and specific features. CRCW08058R25FNTA carries AEC-Q200 automotive qualification. RMCF0805FT8R25 and RC0805FR-078R25L both offer ROHS3 compliance, with RC0805FR-078R25L featuring moisture-resistant construction.

Q: Are there any compatibility concerns with PCB assembly?

A: All three parts use the 0805 (2012 Metric) package with identical footprints. Seated height variations (0.50mm to 0.65mm) are within standard manufacturing tolerances and do not affect assembly compatibility or electrical performance.

Q: Which substitute should be selected for new designs?

A: Selection depends on application requirements. For automotive AEC-Q200 applications, CRCW08058R25FNTA is specified. For RoHS3-compliant applications, either RMCF0805FT8R25 or RC0805FR-078R25L is appropriate. RC0805FR-078R25L is preferred when moisture resistance is a design consideration.

Q: Do these parts require different handling or storage procedures?

A: All three parts carry MSL 1 (Unlimited) rating, indicating identical moisture sensitivity levels. No differential handling or storage procedures are required between these substitutes.