CRCW08056R98FNTA Equivalent & Substitute Parts

Part Overview

The CRCW08056R98FNTA is a 6.98 Ohm ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This component is rated for automotive applications under AEC-Q200 standard with an operating temperature range of -55°C to 155°C. The part is currently active in production with 1071 pieces available in stock. Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and application-specific compliance requirements.

Substiute Parts

CRCW08056R98FNTA

Vishay DaleIn Stock: 1152CRCW08056R98FNTA Datasheet

Current PartRFQ

RMCF0805FT6R98

Stackpole Electronics IncIn Stock: 10893RMCF0805FT6R98 Datasheet

DirectRFQ

RC0805FR-076R98L

YAGEOIn Stock: 49163RC0805FR-076R98L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CRCW08056R98FNTA are qualified based on matching the following critical parameters: resistance value (6.98 Ohms), tolerance (±1%), power rating (0.125W), package type (0805), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C to 155°C), and termination count (2). All identified substitutes maintain identical electrical specifications and physical package dimensions. Mechanical variations in seated height are within acceptable tolerances for standard PCB assembly processes. Compliance certifications and RoHS status may differ between manufacturers and should be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

The RMCF0805FT6R98 (Stackpole Electronics Inc) and RC0805FR-076R98L (YAGEO) are direct electrical equivalents to the CRCW08056R98FNTA. Both substitute parts maintain identical resistance, tolerance, power rating, package configuration, and thermal specifications. Selection between these options should be based on compliance requirements and application constraints. The RMCF0805FT6R98 carries AEC-Q200 automotive qualification matching the original part specification. The RC0805FR-076R98L features moisture-resistant construction and ROHS3 compliance. The CRCW08056R98FNTA is rated AEC-Q200 but is RoHS non-compliant. Seated height variations (0.50mm, 0.65mm, and 0.60mm respectively) are within standard PCB assembly tolerances and do not affect electrical performance or mechanical fit in standard 0805 footprints.

Frequently Asked Questions (FAQ)

Q: Can RMCF0805FT6R98 and RC0805FR-076R98L be used interchangeably with CRCW08056R98FNTA?

A: Yes. All three parts share identical electrical specifications: 6.98 Ohms ±1%, 0.125W power rating, ±200ppm/°C temperature coefficient, and -55°C to 155°C operating range. The 0805 package footprint is standardized across all three manufacturers. Seated height differences are within acceptable assembly tolerances.

Q: What is the difference in automotive qualification between these parts?

A: The CRCW08056R98FNTA and RMCF0805FT6R98 both carry AEC-Q200 automotive qualification. The RC0805FR-076R98L does not list AEC-Q200 certification but features moisture-resistant construction. Application requirements determine which certification is necessary.

Q: Are there RoHS compliance differences?

A: Yes. The CRCW08056R98FNTA is RoHS non-compliant. Both RMCF0805FT6R98 and RC0805FR-076R98L are ROHS3 compliant. Applications subject to RoHS regulations should specify one of the compliant alternatives.

Q: Do the seated height variations affect PCB assembly?

A: No. The maximum seated heights (0.50mm, 0.65mm, and 0.60mm) are all within standard 0805 component tolerances and do not impact PCB layout, reflow soldering, or mechanical clearance in standard designs.

Q: What inventory levels are available for each part?

A: CRCW08056R98FNTA: 1071 pieces; RMCF0805FT6R98: 10851 pieces; RC0805FR-076R98L: 49093 pieces.