CRCW08056K80FKEB Equivalent & Substitute Parts

Part Overview

The CRCW08056K80FKEB is a 6.8 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This part is rated for automotive applications under AEC-Q200 and operates across -55°C to 155°C. The original part number is discontinued at DiGi Electronics, necessitating identification of equivalent and substitute components that maintain electrical and mechanical compatibility for ongoing production and repair applications.

Key Parameters

Parameter	Value
Resistance	6.8 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution for CRCW08056K80FKEB is determined by strict equivalence across the following parameters: resistance value (6.8 kOhms), tolerance (±1%), power rating (0.125W), package type (0805), composition (thick film), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). All substitute parts listed maintain these core electrical specifications and physical dimensions. Compliance certifications (RoHS, REACH, AEC-Q200) and product status (active vs. discontinued) are secondary factors that influence selection priority but do not disqualify functional equivalence.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Composition	Temp Coeff	Op. Temp Range	Height (Max)	Product Status	RoHS Status
CRCW08056K80FKEB	Vishay Dale	6.8 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.020" (0.50mm)	Discontinued	ROHS3 Compliant
CRCW08056K80FKEA	Vishay Dale	6.8 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.020" (0.50mm)	Active	ROHS3 Compliant
CRCW08056K80FKEC	Vishay Dale	6.8 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.020" (0.50mm)	Active	ROHS3 Compliant
CRCW08056K80FKTC	Vishay Dale	6.8 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.020" (0.50mm)	Active	RoHS Non-compliant
CRCW08056K80FKEAC	Vishay Dale	6.8 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.024" (0.60mm)	Active	ROHS3 Compliant
CRCW08056K80FKEBC	Vishay Dale	6.8 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.024" (0.60mm)	Active	ROHS3 Compliant
ERJ-6ENF6801V	Panasonic Electronic Components	6.8 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.028" (0.70mm)	Active	ROHS3 Compliant
RMCF0805FT6K80	Stackpole Electronics Inc	6.8 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.026" (0.65mm)	Active	ROHS3 Compliant
KTR10EZPF6801	Rohm Semiconductor	6.8 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.026" (0.65mm)	Active	ROHS3 Compliant
CR0805-FX-6801ELF	Bourns Inc.	6.8 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.024" (0.60mm)	Active	ROHS3 Compliant

Engineering Selection Recommendations

For applications requiring AEC-Q200 automotive qualification, CRCW08056K80FKEA, CRCW08056K80FKEC, ERJ-6ENF6801V, RMCF0805FT6K80, and KTR10EZPF6801 are qualified alternatives. CRCW08056K80FKEA is the direct Vishay Dale equivalent with identical specifications and active product status. CRCW08056K80FKEAC and CRCW08056K80FKEBC are manufacturer-recommended alternatives from Vishay Dale with ROHS3 compliance and active status, though seated height is 0.024" versus the original 0.020".

For non-automotive applications where AEC-Q200 is not required, CR0805-FX-6801ELF from Bourns offers moisture-resistant thick film construction with ROHS3 compliance and high inventory availability.

CRCW08056K80FKTC maintains full electrical equivalence but carries RoHS non-compliance and REACH-affected status, limiting suitability for regulated markets.

Frequently Asked Questions (FAQ)

Q: Can CRCW08056K80FKEA directly replace CRCW08056K80FKEB? A: Yes. CRCW08056K80FKEA is electrically and mechanically identical to CRCW08056K80FKEB with matching resistance, tolerance, power rating, package, and operating temperature range. The primary difference is product status: CRCW08056K80FKEA is active while CRCW08056K80FKEB is discontinued.

Q: What is the significance of the height difference between substitute parts? A: Seated height varies between 0.020" and 0.028" across the substitute list. For PCB assembly with tight vertical clearance constraints, verify the specific height requirement. CRCW08056K80FKEA and CRCW08056K80FKEC maintain the original 0.020" height. CRCW08056K80FKEAC, CRCW08056K80FKEBC, and CR0805-FX-6801ELF are 0.024". ERJ-6ENF6801V is 0.028".

Q: Are all substitute parts RoHS3 compliant? A: All substitutes except CRCW08056K80FKTC are ROHS3 compliant. CRCW08056K80FKTC is RoHS non-compliant and REACH-affected, restricting use in regulated markets.

Q: Which substitutes maintain AEC-Q200 automotive qualification? A: CRCW08056K80FKEA, CRCW08056K80FKEC, ERJ-6ENF6801V, RMCF0805FT6K80, and KTR10EZPF6801 are all AEC-Q200 qualified. CRCW08056K80FKEAC, CRCW08056K80FKEBC, and CR0805-FX-6801ELF do not carry AEC-Q200 ratings.

Q: Can I use CR0805-FX-6801ELF in automotive applications? A: CR0805-FX-6801ELF is not AEC-Q200 qualified. It is suitable for non-automotive applications requiring moisture-resistant thick film construction.

Q: What is the difference between CRCW08056K80FKEA and CRCW08056K80FKEAC? A: Both are Vishay Dale products with identical electrical specifications. CRCW08056K80FKEA has seated height of 0.020" and is part of the CRCW series. CRCW08056K80FKEAC has seated height of 0.024" and is part of the CRCW-C series. Both are ROHS3 compliant and active.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message