CRCW0805680RFHEAP Equivalent & Substitute Parts

Part Overview

The CRCW0805680RFHEAP is a 680 Ohm ±1% thick film chip resistor in 0805 (2012 Metric) package format, rated for 0.125W (1/8W) power dissipation. Manufactured by Vishay Dale, this component meets AEC-Q200 automotive qualification standards and operates across the temperature range of -55°C to 155°C. The part is currently in active production status with RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and access to alternative inventory sources while maintaining identical electrical and mechanical performance.

Substiute Parts

CRCW0805680RFHEAP

Vishay DaleIn Stock: 1075CRCW0805680RFHEAP Datasheet

Current PartRFQ

RE0805FRE07680RL

YAGEOIn Stock: 10967RE0805FRE07680RL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW0805680RFHEAP is determined by strict equivalence across the following critical parameters:

• Resistance value: 680 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package format: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -55°C to 155°C
• Termination count: 2
• RoHS3 compliance status

The RE0805FRE07680RL manufactured by YAGEO meets all specified electrical and mechanical parameters, establishing it as a direct equivalent substitute for the CRCW0805680RFHEAP.

Parameter Comparison

Engineering Selection Recommendations

Both the CRCW0805680RFHEAP and RE0805FRE07680RL are active production components with RoHS3 compliance and identical electrical specifications. The CRCW0805680RFHEAP carries AEC-Q200 automotive qualification, while the RE0805FRE07680RL does not list this certification in the provided data. Selection between these parts should be based on specific application requirements: the CRCW0805680RFHEAP is appropriate for automotive-grade applications requiring AEC-Q200 certification, while the RE0805FRE07680RL serves general industrial and commercial applications with equivalent electrical performance. The maximum seated height difference of 0.004" (0.10mm) between the two parts is negligible for standard PCB assembly processes and does not impact functional compatibility in typical circuit designs.

Frequently Asked Questions (FAQ)

Q: Can the RE0805FRE07680RL replace the CRCW0805680RFHEAP in all applications?

A: The RE0805FRE07680RL matches all electrical and mechanical parameters of the CRCW0805680RFHEAP. However, if your application specifically requires AEC-Q200 automotive qualification, the CRCW0805680RFHEAP is the appropriate choice, as this certification is not listed for the YAGEO part.

Q: Are there physical compatibility concerns between these two 0805 package resistors?

A: Both parts use the 0805 (2012 Metric) package format with identical footprints. The maximum seated height difference of 0.004" (0.10mm) does not create assembly or clearance issues in standard PCB designs.

Q: Do both parts meet RoHS3 compliance requirements?

A: Yes, both the CRCW0805680RFHEAP and RE0805FRE07680RL are ROHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Q: What is the temperature stability difference between these resistors?

A: Both parts specify an identical temperature coefficient of ±50ppm/°C and operate across the same temperature range of -55°C to 155°C, ensuring equivalent thermal performance.

Q: Are these parts suitable for high-reliability applications?

A: The CRCW0805680RFHEAP is qualified to AEC-Q200 automotive standards, making it suitable for high-reliability automotive applications. The RE0805FRE07680RL is suitable for general industrial and commercial high-reliability applications where AEC-Q200 certification is not required.