CRCW080562R0JNTA Equivalent & Substitute Parts

Part Overview

The CRCW080562R0JNTA is a 62 Ohm, ±5% tolerance, 1/8W (0.125W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This component is rated for automotive applications under AEC-Q200 standard and operates across -55°C to 155°C. The part is currently active in production. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part becomes unavailable or when design requirements necessitate alternative specifications.

Key Parameters

Parameter	Value
Resistance	62 Ohms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package	0805 (2012 Metric)
Composition	Thick Film
Operating Temperature Range	-55°C to 155°C
Temperature Coefficient	±200ppm/°C
Automotive Rating	AEC-Q200
Packaging Type	Tape & Reel (TR)
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute parts are classified into two categories based on electrical and mechanical compatibility:

Direct Equivalents maintain identical electrical specifications (62 Ohms, ±5% tolerance, 0.125W power rating, 0805 package, -55°C to 155°C operating range, ±200ppm/°C temperature coefficient) and automotive AEC-Q200 certification. These parts differ only in manufacturer, RoHS compliance status, or minor physical dimensions (height variation within acceptable limits). Direct equivalents are pin-compatible and functionally interchangeable without circuit redesign.

Upgrade Substitutes increase the power rating (0.4W or 0.5W) while maintaining all other critical parameters (62 Ohms, ±5% tolerance, 0805 package, -55°C to 155°C operating range, AEC-Q200 certification). These parts provide enhanced thermal performance and pulse withstanding capability. Upgrade substitutes are mechanically and electrically compatible but offer superior performance margins.

Key parameters determining substitution eligibility:

Resistance value: 62 Ohms (exact match required)
Tolerance: ±5% (exact match required)
Package: 0805 (2012 Metric) (exact match required)
Operating temperature range: -55°C to 155°C (exact match required)
Composition: Thick Film (exact match required)

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff (ppm/°C)	Operating Temp (°C)	AEC-Q200	Height Max (mm)	RoHS Status
CRCW080562R0JNTA	Vishay Dale	62 Ω	±5%	0.125	0805	±200	-55 to 155	Yes	0.50	Non-compliant
CRCW080562R0JNEA	Vishay Dale	62 Ω	±5%	0.125	0805	±200	-55 to 155	Yes	0.50	ROHS3 Compliant
ERJ-6GEYJ620V	Panasonic Electronic Components	62 Ω	±5%	0.125	0805	±200	-55 to 155	Yes	0.70	ROHS3 Compliant
RC0805JR-0762RL	YAGEO	62 Ω	±5%	0.125	0805	±100	-55 to 155	No	0.60	ROHS3 Compliant
RMCF0805JT62R0	Stackpole Electronics Inc	62 Ω	±5%	0.125	0805	±200	-55 to 155	Yes	0.65	ROHS3 Compliant
ERJ-P06J620V	Panasonic Electronic Components	62 Ω	±5%	0.5	0805	±200	-55 to 155	Yes	0.70	ROHS3 Compliant
ESR10EZPJ620	Rohm Semiconductor	62 Ω	±5%	0.4	0805	±200	-55 to 155	Yes	0.65	ROHS3 Compliant

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications):

CRCW080562R0JNEA (Vishay Dale) is the primary direct equivalent, offering identical electrical performance with ROHS3 compliance upgrade. This part maintains the same manufacturer lineage and is recommended for designs requiring RoHS compliance without performance modification.

RMCF0805JT62R0 (Stackpole Electronics Inc) provides direct equivalence with AEC-Q200 certification and ROHS3 compliance. This part is suitable for automotive applications requiring certified substitution.

ERJ-6GEYJ620V (Panasonic Electronic Components) delivers direct electrical equivalence with AEC-Q200 certification and ROHS3 compliance. Physical height is 0.70mm compared to 0.50mm of the primary part; verify PCB clearance in space-constrained layouts.

RC0805JR-0762RL (YAGEO) provides electrical equivalence with improved temperature coefficient (±100ppm/°C versus ±200ppm/°C). This part lacks AEC-Q200 certification; use only in non-automotive applications or where automotive qualification is not required.

For Enhanced Performance (Upgrade Substitutes):

ERJ-P06J620V (Panasonic Electronic Components) increases power rating to 0.5W while maintaining all other specifications including AEC-Q200 certification and ROHS3 compliance. Use this part when circuit analysis indicates higher power dissipation margins are beneficial.

ESR10EZPJ620 (Rohm Semiconductor) increases power rating to 0.4W with pulse withstanding capability, AEC-Q200 certification, and ROHS3 compliance. This part provides intermediate power performance enhancement.

Frequently Asked Questions (FAQ)

Q: Can CRCW080562R0JNTA be replaced with RC0805JR-0762RL?

A: Electrical substitution is possible for non-automotive applications. Both parts share identical resistance (62 Ohms), tolerance (±5%), power rating (0.125W), package (0805), and operating temperature range (-55°C to 155°C). However, RC0805JR-0762RL lacks AEC-Q200 automotive certification and has a lower temperature coefficient (±100ppm/°C). For automotive designs, use AEC-Q200 certified alternatives instead.

Q: What is the difference between direct equivalents and upgrade substitutes?

A: Direct equivalents (CRCW080562R0JNEA, ERJ-6GEYJ620V, RMCF0805JT62R0) maintain the 0.125W power rating and are functionally identical to the primary part. Upgrade substitutes (ERJ-P06J620V at 0.5W, ESR10EZPJ620 at 0.4W) provide higher power ratings for applications requiring enhanced thermal performance or pulse withstanding capability. All maintain the same resistance, tolerance, package, and temperature range.

Q: Are all substitute parts RoHS compliant?

A: The primary part CRCW080562R0JNTA is RoHS non-compliant. All listed direct equivalents and upgrade substitutes are ROHS3 compliant. If RoHS compliance is required, select from the substitute list.

Q: Does physical height variation affect PCB assembly?

A: Physical height differences exist among substitutes (ranging from 0.50mm to 0.70mm maximum seated height). Verify PCB clearance and solder reflow profile compatibility for your specific assembly process. Height variation does not affect electrical performance but may impact space-constrained layouts.

Q: Can upgrade substitutes be used in place of the original part?

A: Yes. Upgrade substitutes with higher power ratings (0.4W or 0.5W) are electrically and mechanically compatible with designs specified for 0.125W. They provide superior performance margins and are suitable for direct substitution without circuit redesign. Verify that PCB layout accommodates any minor physical dimension differences.

Q: Which substitute is recommended for automotive applications?

A: For automotive applications, select parts with AEC-Q200 certification: CRCW080562R0JNEA, ERJ-6GEYJ620V, RMCF0805JT62R0, ERJ-P06J620V, or ESR10EZPJ620. All maintain the required -55°C to 155°C operating range and automotive qualification standards.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message