CRCW08055R76FNTA Equivalent & Substitute Parts

Part Overview

The CRCW08055R76FNTA is a 5.76 Ohm ±1% 0.125W chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This thick film resistor is designed for automotive applications and meets AEC-Q200 qualification standards. The part is currently in active production status with 1075 pieces available in inventory. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility is required while maintaining electrical and mechanical compatibility.

Substiute Parts

CRCW08055R76FNTA

Vishay DaleIn Stock: 1170CRCW08055R76FNTA Datasheet

Current PartRFQ

RC0805FR-075R76L

YAGEOIn Stock: 13076RC0805FR-075R76L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CRCW08055R76FNTA are qualified based on the following critical parameters:

• Resistance value: 5.76 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.125W, 1/8W (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±200ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)
• Number of terminations: 2 (exact match required)

The RC0805FR-075R76L from YAGEO meets all electrical and mechanical substitution criteria. Both parts share identical resistance, tolerance, power rating, package dimensions, composition type, and operating specifications. Substitution is valid when these parameters align precisely.

Parameter Comparison

Engineering Selection Recommendations

The CRCW08055R76FNTA is qualified to AEC-Q200 automotive standards and carries RoHS non-compliant status with REACH Affected designation. The RC0805FR-075R76L substitute from YAGEO is ROHS3 compliant and REACH Unaffected, offering improved regulatory alignment for applications where compliance requirements have evolved.

Selection between these parts should be based on:

• Automotive qualification requirements: CRCW08055R76FNTA meets AEC-Q200 specification
• Regulatory compliance: RC0805FR-075R76L provides ROHS3 compliance and REACH unaffected status
• Physical clearance: Height difference of 0.004" (0.10mm) between seated heights must be verified for PCB layout constraints
• Supply availability: Current inventory levels and lead time requirements

Both parts are electrically and mechanically interchangeable within the specified parameters.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-075R76L replace CRCW08055R76FNTA in automotive applications?

A: The RC0805FR-075R76L meets all electrical specifications (5.76 Ohms ±1%, 0.125W, ±200ppm/°C, -55°C to 155°C). However, the CRCW08055R76FNTA carries AEC-Q200 automotive qualification while the RC0805FR-075R76L does not. Substitution is valid only if automotive qualification is not a design requirement.

Q: What is the physical difference between these parts?

A: Both parts use the 0805 (2012 Metric) package with identical length and width (0.079" x 0.049"). The seated height differs by 0.004" (0.10mm), with CRCW08055R76FNTA at 0.020" maximum and RC0805FR-075R76L at 0.024" maximum. This difference must be evaluated for PCB assembly clearance.

Q: Are the tolerance and temperature coefficient specifications identical?

A: Yes. Both parts specify ±1% tolerance and ±200ppm/°C temperature coefficient, ensuring equivalent performance in circuit applications.

Q: What packaging formats are available for these parts?

A: Both parts are supplied in Tape & Reel (TR) format, standard for automated PCB assembly processes.

Q: How do compliance ratings differ between these parts?

A: CRCW08055R76FNTA is RoHS non-compliant and REACH Affected. RC0805FR-075R76L is ROHS3 compliant and REACH Unaffected, providing better alignment with current environmental regulations.