CRCW08055R60FNTA Equivalent & Substitute Parts

Part Overview

The CRCW08055R60FNTA is a 5.6 Ohm ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This component is rated for automotive applications under AEC-Q200 standard with an operating temperature range of -55°C to 155°C. The part is currently active in production. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring 5.6 Ohm resistive elements with matching electrical and mechanical specifications.

Substiute Parts

CRCW08055R60FNTA

Vishay DaleIn Stock: 1004CRCW08055R60FNTA Datasheet

Current PartRFQ

RMCF0805FT5R60

Stackpole Electronics IncIn Stock: 158963RMCF0805FT5R60 Datasheet

DirectRFQ

AC0805FR-075R6L

YAGEOIn Stock: 4518AC0805FR-075R6L Datasheet

UpgradeRFQ

ESR10EZPF5R60

Rohm SemiconductorIn Stock: 14690ESR10EZPF5R60 Datasheet

UpgradeRFQ

RC0805FR-075R6L

YAGEOIn Stock: 87246RC0805FR-075R6L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW08055R60FNTA is determined by strict equivalence across the following critical parameters: resistance value (5.6 Ohms), tolerance (±1%), package type (0805 / 2012 Metric), composition (thick film), and automotive qualification (AEC-Q200). All identified substitute parts meet these core requirements. Substitutes are grouped into three categories based on additional performance characteristics:

Direct Equivalent: RMCF0805FT5R60 (Stackpole Electronics Inc) matches all primary electrical and mechanical specifications with identical power rating (0.125W) and temperature coefficient (±200ppm/°C).

Upgrade Options: AC0805FR-075R6L (YAGEO) and ESR10EZPF5R60 (Rohm Semiconductor) provide enhanced features. AC0805FR-075R6L adds moisture-resistant construction. ESR10EZPF5R60 offers increased power rating (0.4W) and improved temperature coefficient (±100ppm/°C) with pulse-withstanding capability.

Manufacturer Recommended: RC0805FR-075R6L (YAGEO) is designated as manufacturer-recommended substitute with moisture-resistant thick film construction and equivalent electrical performance.

Parameter Comparison

Engineering Selection Recommendations

RMCF0805FT5R60 is the direct equivalent substitute. It maintains identical electrical specifications and AEC-Q200 automotive qualification while achieving ROHS3 compliance. This part is suitable for direct replacement in applications where the original CRCW08055R60FNTA is specified, with the advantage of improved environmental compliance and higher inventory availability (158,911 units in stock).

AC0805FR-075R6L is recommended for applications requiring enhanced moisture resistance. It retains AEC-Q200 qualification and ROHS3 compliance with moisture-resistant thick film construction. The seated height of 0.024" (0.60mm) is within acceptable tolerance for 0805 package footprints.

ESR10EZPF5R60 is selected for applications requiring higher power dissipation capability (0.4W versus 0.125W) or improved temperature stability (±100ppm/°C versus ±200ppm/°C). This part includes pulse-withstanding capability and maintains AEC-Q200 qualification and ROHS3 compliance. The increased seated height of 0.026" (0.65mm) must be verified against PCB assembly clearance requirements.

RC0805FR-075R6L is the manufacturer-recommended substitute with moisture-resistant construction and equivalent electrical performance. It provides ROHS3 compliance and high inventory availability (87,169 units in stock). Note that AEC-Q200 automotive rating is not specified for this part; verification against application requirements is necessary.

Frequently Asked Questions (FAQ)

Q: Can RMCF0805FT5R60 be used as a direct replacement for CRCW08055R60FNTA?

A: Yes. RMCF0805FT5R60 matches all critical electrical parameters (5.6 Ohms ±1%, 0.125W, ±200ppm/°C) and maintains AEC-Q200 automotive qualification. Both parts are 0805 package thick film resistors with identical operating temperature range (-55°C to 155°C). The primary difference is improved RoHS3 compliance status.

Q: What is the difference between the substitute parts?

A: RMCF0805FT5R60 and RC0805FR-075R6L are direct electrical equivalents with moisture-resistant construction in RC0805FR-075R6L. AC0805FR-075R6L adds explicit moisture-resistant features with AEC-Q200 qualification. ESR10EZPF5R60 differs by offering higher power rating (0.4W), improved temperature coefficient (±100ppm/°C), and pulse-withstanding capability, making it suitable for higher-stress applications.

Q: Are there physical compatibility concerns when substituting these parts?

A: All substitute parts use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). Seated heights vary slightly: CRCW08055R60FNTA at 0.020" (0.50mm), RMCF0805FT5R60 and ESR10EZPF5R60 at 0.026" (0.65mm), and AC0805FR-075R6L and RC0805FR-075R6L at 0.024" (0.60mm). Verify PCB assembly clearance specifications for applications with tight vertical constraints.

Q: Which substitute part should be selected for new designs?

A: For new automotive designs, RMCF0805FT5R60 or AC0805FR-075R6L are recommended due to AEC-Q200 qualification and ROHS3 compliance. AC0805FR-075R6L is preferred if moisture resistance is a design requirement. ESR10EZPF5R60 is selected only if the higher power rating (0.4W) and improved temperature coefficient (±100ppm/°C) are necessary for the application.

Q: What is the significance of the temperature coefficient difference in ESR10EZPF5R60?

A: ESR10EZPF5R60 has a temperature coefficient of ±100ppm/°C compared to ±200ppm/°C for other parts. This means the resistance value changes less with temperature variations, providing improved stability in applications with wide operating temperature ranges or stringent tolerance requirements.

Q: Is RoHS compliance a factor in part selection?

A: The original CRCW08055R60FNTA is RoHS non-compliant. All substitute parts (RMCF0805FT5R60, AC0805FR-075R6L, ESR10EZPF5R60, and RC0805FR-075R6L) are ROHS3 compliant. For applications subject to RoHS regulations or customer requirements, substitute parts are mandatory.