CRCW0805560RFKTC Equivalent & Substitute Parts

Part Overview

The CRCW0805560RFKTC is a 560 Ohm ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This automotive-grade component meets AEC-Q200 specifications and is designed for high-reliability applications requiring stable resistance performance across extended temperature ranges. The part is currently active in production with 658 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Key Parameters

Parameter	Value
Resistance	560 Ohms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Number of Terminations	2
Ratings	AEC-Q200 (where applicable)
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Resistance value: 560 Ohms
Tolerance: ±1%
Power rating: 0.125W (1/8W)
Package: 0805 (2012 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Termination count: 2
Moisture sensitivity level: 1 (Unlimited)

All identified substitute parts meet these electrical and mechanical specifications. Variations in physical dimensions (height-seated), packaging format (Tape & Reel vs. Cut Tape), and compliance certifications (RoHS, REACH status) are noted but do not affect functional interchangeability within the specified parameter set.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	AEC-Q200	RoHS Status	Height (Max)	Packaging	Inventory
CRCW0805560RFKTC	Vishay Dale	560 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	Yes	Non-compliant	0.020" (0.50mm)	Tape & Reel	658 Pcs
CRCW0805560RFKEA	Vishay Dale	560 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	Yes	ROHS3 Compliant	0.020" (0.50mm)	Tape & Reel	14448 Pcs
CRCW0805560RFKEAC	Vishay Dale	560 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	No	ROHS3 Compliant	0.024" (0.60mm)	Tape & Reel	47419 Pcs
ERJ-6ENF5600V	Panasonic Electronic Components	560 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	Yes	ROHS3 Compliant	0.028" (0.70mm)	Tape & Reel	239902 Pcs
RMCF0805FT560R	Stackpole Electronics Inc	560 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	Yes	ROHS3 Compliant	0.026" (0.65mm)	Tape & Reel	124050 Pcs
KTR10EZPF5600	Rohm Semiconductor	560 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	Yes	ROHS3 Compliant	0.026" (0.65mm)	Cut Tape	10561 Pcs
CR0805-FX-5600ELF	Bourns Inc.	560 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	No	ROHS3 Compliant	0.024" (0.60mm)	Tape & Reel	52570 Pcs

Engineering Selection Recommendations

All substitute parts listed maintain functional equivalence to the CRCW0805560RFKTC across core electrical specifications. Selection criteria should prioritize the following factors based on application requirements:

AEC-Q200 Automotive Grade Requirement: CRCW0805560RFKEA, ERJ-6ENF5600V, and RMCF0805FT560R retain AEC-Q200 certification. CRCW0805560RFKEAC and CR0805-FX-5600ELF do not carry this rating and are suitable only for non-automotive applications.

RoHS3 Compliance: CRCW0805560RFKEA, CRCW0805560RFKEAC, ERJ-6ENF5600V, RMCF0805FT560R, KTR10EZPF5600, and CR0805-FX-5600ELF are ROHS3 compliant. The original CRCW0805560RFKTC is RoHS non-compliant.

Packaging Format: KTR10EZPF5600 is supplied in Cut Tape format; all other substitutes are available in Tape & Reel packaging.

Physical Height Constraints: Height-seated maximum values range from 0.020" (0.50mm) to 0.028" (0.70mm). Applications with tight PCB clearance requirements should reference specific height specifications.

Inventory Availability: ERJ-6ENF5600V offers the highest stock level (239,902 units), followed by CRCW0805560RFKEAC (47,419 units) and RMCF0805FT560R (124,050 units).

Frequently Asked Questions (FAQ)

Q: Can CRCW0805560RFKEAC be used as a direct replacement for CRCW0805560RFKTC in automotive applications?

A: No. While CRCW0805560RFKEAC meets all electrical and mechanical specifications, it does not carry AEC-Q200 certification. Automotive applications requiring AEC-Q200 qualification must use CRCW0805560RFKEA, ERJ-6ENF5600V, or RMCF0805FT560R.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, suitable for high-volume automated assembly. Cut Tape supplies components on tape segments, typically for lower-volume or manual assembly operations. KTR10EZPF5600 is the only substitute available in Cut Tape format.

Q: Are all substitute parts functionally identical to the original CRCW0805560RFKTC?

A: All substitute parts meet the specified electrical parameters (560 Ohms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C operating range) and mechanical package requirements (0805, 2 terminations, MSL 1). Functional interchangeability is confirmed within these parameters. Compliance certifications and physical dimensions vary as documented.

Q: Which substitute offers the best availability?

A: ERJ-6ENF5600V (Panasonic) provides the highest inventory level at 239,902 units in stock, combined with AEC-Q200 certification and ROHS3 compliance.

Q: Can CR0805-FX-5600ELF replace CRCW0805560RFKTC in automotive circuits?

A: No. CR0805-FX-5600ELF lacks AEC-Q200 certification and is not suitable for automotive applications. It is appropriate for industrial and consumer applications requiring ROHS3 compliance and moisture-resistant thick film composition.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message