Request Quote
(Ships tomorrow)
CRCW08053R65FNTA Equivalent & Substitute Parts
Part Overview
The CRCW08053R65FNTA is a 3.65 Ohm ±1% 0.125W chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This thick film resistor is designed for automotive applications and meets AEC-Q200 qualification standards. The part is currently active in production with 1133 pieces available in stock. Equivalent and substitute parts are identified to provide design flexibility, ensure supply chain continuity, and accommodate specific application requirements such as RoHS compliance or alternative sourcing needs.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Resistance | 3.65 Ohms |
| Tolerance | ±1% |
| Power Rating | 0.125W (1/8W) |
| Package / Case | 0805 (2012 Metric) |
| Composition | Thick Film |
| Temperature Coefficient | ±200ppm/°C |
| Operating Temperature Range | -55°C ~ 155°C |
| Number of Terminations | 2 |
| Moisture Sensitivity Level | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility for the CRCW08053R65FNTA is determined by the following critical parameters:
- Resistance value: 3.65 Ohms (exact match required)
- Tolerance: ±1% (exact match required)
- Power rating: 0.125W / 1/8W (exact match required)
- Package: 0805 (2012 Metric) (exact match required)
- Composition: Thick Film (exact match required)
- Temperature coefficient: ±200ppm/°C (exact match required)
- Operating temperature range: -55°C ~ 155°C (exact match or wider range acceptable)
- Termination count: 2 (exact match required)
- Moisture sensitivity: MSL 1 (exact match required)
The RC0805FR-073R65L from YAGEO meets all critical substitution criteria and is classified as a manufacturer-recommended equivalent.
Parameter Comparison
| Parameter | CRCW08053R65FNTA (Vishay Dale) | RC0805FR-073R65L (YAGEO) |
|---|---|---|
| Resistance | 3.65 Ohms | 3.65 Ohms |
| Tolerance | ±1% | ±1% |
| Power Rating | 0.125W (1/8W) | 0.125W (1/8W) |
| Package / Case | 0805 (2012 Metric) | 0805 (2012 Metric) |
| Composition | Thick Film | Thick Film |
| Temperature Coefficient | ±200ppm/°C | ±200ppm/°C |
| Operating Temperature Range | -55°C ~ 155°C | -55°C ~ 155°C |
| Number of Terminations | 2 | 2 |
| Moisture Sensitivity Level | 1 (Unlimited) | 1 (Unlimited) |
| Size / Dimension | 0.079" L x 0.049" W (2.00mm x 1.25mm) | 0.079" L x 0.049" W (2.00mm x 1.25mm) |
| Height - Seated (Max) | 0.020" (0.50mm) | 0.024" (0.60mm) |
| Series | CRCW | RC_L |
| Product Status | Active | Active |
Engineering Selection Recommendations
Both the CRCW08053R65FNTA and RC0805FR-073R65L are active production parts with identical electrical specifications and package dimensions. Selection between these parts should be based on the following factors:
The CRCW08053R65FNTA carries AEC-Q200 automotive qualification and is RoHS non-compliant. This part is suitable for automotive applications requiring automotive-grade reliability standards.
The RC0805FR-073R65L is ROHS3 compliant and features moisture-resistant construction. This part is suitable for applications requiring RoHS compliance. The maximum seated height of 0.024" (0.60mm) is 0.004" greater than the CRCW08053R65FNTA; this difference must be evaluated for PCB layout and assembly clearance constraints.
Both parts are REACH affected or unaffected respectively; regulatory compliance requirements should be verified against application jurisdiction.
Frequently Asked Questions (FAQ)
Q: Can RC0805FR-073R65L be used as a direct replacement for CRCW08053R65FNTA?
A: Yes. Both parts share identical electrical specifications (3.65 Ohms ±1%, 0.125W, ±200ppm/°C, -55°C ~ 155°C), identical package dimensions (0805 / 2012 Metric), and identical moisture sensitivity level (MSL 1). The maximum seated height difference of 0.004" must be verified against PCB assembly requirements.
Q: What is the primary difference between these two parts?
A: The CRCW08053R65FNTA is AEC-Q200 qualified for automotive applications and is RoHS non-compliant. The RC0805FR-073R65L is ROHS3 compliant with moisture-resistant construction. Selection depends on automotive qualification requirements versus RoHS compliance mandates.
Q: Are there any package compatibility concerns?
A: Both parts use the 0805 (2012 Metric) package with identical length and width dimensions (0.079" x 0.049" / 2.00mm x 1.25mm). The seated height difference (0.50mm versus 0.60mm) is minimal but should be confirmed against PCB design specifications and assembly equipment clearance.
Q: What is the moisture sensitivity level for these parts?
A: Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.
Q: Can these parts be used in non-automotive applications?
A: Yes. While the CRCW08053R65FNTA is AEC-Q200 qualified, both parts meet the same electrical and thermal specifications and can be used in general industrial and commercial applications. RoHS compliance requirements should be verified for the specific application.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts

