CRCW08053R32FNEA Equivalent & Substitute Parts

Part Overview

The CRCW08053R32FNEA is a 3.32 Ohm ±1% 0.125W (1/8W) chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This thick film resistor is qualified to automotive AEC-Q200 standards and is currently in active production status with 932 pieces in stock. Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and component availability across multiple manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

CRCW08053R32FNEA

Vishay DaleIn Stock: 957CRCW08053R32FNEA Datasheet

Current PartRFQ

CRCW08053R32FKEA

Vishay DaleIn Stock: 29190CRCW08053R32FKEA Datasheet

UpgradeRFQ

RMCF0805FT3R32

Stackpole Electronics IncIn Stock: 32832RMCF0805FT3R32 Datasheet

DirectRFQ

RC0805FR-073R32L

YAGEOIn Stock: 45759RC0805FR-073R32L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW08053R32FNEA is determined by strict equivalence across the following critical parameters:

• Resistance value: 3.32 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Operating temperature range: -55°C ~ 155°C
• Termination count: 2
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1 (Unlimited)

All identified substitute parts meet these core electrical and mechanical requirements. Variations in temperature coefficient, height-seated maximum, and specific feature designations (automotive AEC-Q200 vs. moisture resistant) do not preclude substitution when the above parameters are matched.

Parameter Comparison

Engineering Selection Recommendations

All four parts listed are electrically and mechanically equivalent for 0805 chip resistor applications requiring 3.32 Ohm ±1% 0.125W specifications. Selection among these parts should be based on the following factors:

CRCW08053R32FNEA (Vishay Dale): Primary specification part with automotive AEC-Q200 qualification. Use when AEC-Q200 certification is a design requirement.

CRCW08053R32FKEA (Vishay Dale): Vishay Dale alternative with improved temperature coefficient (±100ppm/°C vs. ±200ppm/°C). Maintains automotive AEC-Q200 qualification and identical package dimensions. Higher inventory availability (29114 pcs) supports supply chain continuity.

RMCF0805FT3R32 (Stackpole Electronics Inc): Direct manufacturer alternative with automotive AEC-Q200 qualification. Seated height maximum of 0.026" (0.65mm) is 0.006" greater than primary part. Highest inventory availability (32722 pcs) among Stackpole offerings.

RC0805FR-073R32L (YAGEO): Manufacturer-recommended alternative with moisture-resistant thick film composition. Packaged in Cut Tape (CT) & Digi-Reel® format. Seated height maximum of 0.024" (0.60mm) is intermediate between other options. Highest overall inventory availability (45689 pcs).

All parts maintain ROHS3 compliance, MSL 1 rating, and -55°C ~ 155°C operating temperature range. Selection should account for packaging format requirements (Tape & Reel vs. Cut Tape), seated height constraints in PCB assembly, and supply chain preferences.

Frequently Asked Questions (FAQ)

Q: Can CRCW08053R32FKEA replace CRCW08053R32FNEA in automotive applications?

A: Yes. Both parts are Vishay Dale products with identical electrical specifications (3.32 Ohms ±1%, 0.125W), package dimensions (0805), and automotive AEC-Q200 qualification. CRCW08053R32FKEA offers improved temperature coefficient (±100ppm/°C). Verify design temperature stability requirements before substitution.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, suitable for automated pick-and-place assembly. Cut Tape (CT) & Digi-Reel® packaging supplies components on cut tape segments, typically for lower-volume or manual assembly operations. Both formats contain identical components; selection depends on assembly process requirements.

Q: Does the seated height difference between parts affect PCB assembly?

A: Seated height variations range from 0.020" (0.50mm) to 0.026" (0.65mm). These differences are within typical PCB assembly tolerances for 0805 components. Verify clearance requirements for specific PCB designs, particularly in high-density layouts or applications with height constraints.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All four parts listed are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings, meeting environmental and regulatory requirements for commercial and automotive applications.

Q: Which part should be selected for maximum supply availability?

A: RC0805FR-073R32L (YAGEO) offers the highest inventory availability at 45689 pieces. RMCF0805FT3R32 (Stackpole) provides 32722 pieces, and CRCW08053R32FKEA (Vishay Dale) provides 29114 pieces. Inventory levels support supply chain flexibility across multiple manufacturers.