CRCW08053R16FNTA Equivalent & Substitute Parts

Part Overview

The CRCW08053R16FNTA is a 3.16 Ohm ±1% 0.125W chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This thick film resistor is designed for automotive applications and meets AEC-Q200 qualification standards. The component is currently in active production status with 748 pieces available in stock.

Substitute parts are necessary when the primary manufacturer part becomes unavailable, when supply chain constraints require alternative sourcing, or when design flexibility permits equivalent components that meet identical electrical and mechanical specifications.

Substiute Parts

CRCW08053R16FNTA

Vishay DaleIn Stock: 834CRCW08053R16FNTA Datasheet

Current PartRFQ

RC0805FR-073R16L

YAGEOIn Stock: 1585RC0805FR-073R16L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW08053R16FNTA is determined by strict equivalence across the following parameters:

• Resistance value: 3.16 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Termination count: 2
• Moisture sensitivity level: 1 (Unlimited)

The RC0805FR-073R16L from YAGEO meets all these criteria and qualifies as a direct substitute. Both components share identical electrical performance specifications and are compatible with the same PCB footprint and assembly processes.

Parameter Comparison

Engineering Selection Recommendations

The RC0805FR-073R16L is electrically and mechanically equivalent to the CRCW08053R16FNTA across all specified parameters. Both components are active products with established supply availability.

The CRCW08053R16FNTA carries AEC-Q200 automotive qualification and is RoHS non-compliant. The RC0805FR-073R16L is ROHS3 compliant and REACH unaffected, offering improved regulatory compliance for applications where these certifications are required.

Selection between these two parts should be based on application-specific compliance requirements and supply chain considerations. The maximum seated height difference of 0.004" (0.10mm) is negligible for standard PCB assembly processes.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-073R16L replace CRCW08053R16FNTA in automotive applications?

A: The RC0805FR-073R16L meets all electrical and mechanical specifications of the CRCW08053R16FNTA. However, the CRCW08053R16FNTA carries AEC-Q200 qualification while the RC0805FR-073R16L does not. Application requirements for automotive qualification must be evaluated before substitution.

Q: Are the physical dimensions identical?

A: Both components use the 0805 (2012 Metric) package with identical length and width (0.079" x 0.049"). The maximum seated height differs by 0.004" (0.10mm), which does not affect PCB footprint compatibility or standard assembly processes.

Q: What is the difference in RoHS compliance?

A: The CRCW08053R16FNTA is RoHS non-compliant. The RC0805FR-073R16L is ROHS3 compliant. Applications subject to RoHS regulations should use the RC0805FR-073R16L.

Q: Are both parts available in Tape & Reel packaging?

A: Yes, both the CRCW08053R16FNTA and RC0805FR-073R16L are supplied in Tape & Reel (TR) packaging suitable for automated assembly.

Q: Do these resistors have identical temperature performance?

A: Yes, both components have a temperature coefficient of ±200ppm/°C and operate across the same temperature range of -55°C to 155°C.