CRCW08053R00FNEB Equivalent & Substitute Parts

Part Overview

The CRCW08053R00FNEB is a 3 Ohm ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This component is rated for automotive applications under AEC-Q200 standard and operates across -55°C to 155°C. The part is currently active in production with 855 pieces available in stock. Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and design validation across qualified manufacturers.

Substiute Parts

CRCW08053R00FNEB

Vishay DaleIn Stock: 931CRCW08053R00FNEB Datasheet

Current PartRFQ

CRCW08053R00FNEA

Vishay DaleIn Stock: 20724CRCW08053R00FNEA Datasheet

DirectRFQ

RMCF0805FT3R00

Stackpole Electronics IncIn Stock: 17903RMCF0805FT3R00 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CRCW08053R00FNEB are qualified based on strict electrical and mechanical parameter matching:

Primary Substitution Criteria:

• Resistance value: 3 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.125W / 1/8W (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±200ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)
• Automotive qualification: AEC-Q200 (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)
• Moisture sensitivity: MSL 1 (exact match required)

All identified substitutes meet these criteria across different manufacturers, enabling direct replacement in automotive and industrial applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—CRCW08053R00FNEB, CRCW08053R00FNEA, and RMCF0805FT3R00—are active production components with full AEC-Q200 automotive qualification and ROHS3 compliance. They are electrically and functionally equivalent for 3 Ohm ±1% 0.125W applications.

Mechanical Consideration: The RMCF0805FT3R00 (Stackpole Electronics) has a maximum seated height of 0.026" (0.65mm) compared to 0.020" (0.50mm) for both Vishay Dale variants. This 0.006" (0.15mm) difference must be evaluated against PCB layout constraints and assembly clearances in height-critical applications.

Manufacturer Availability: CRCW08053R00FNEA offers the highest inventory (20,649 pieces), followed by RMCF0805FT3R00 (17,852 pieces), with CRCW08053R00FNEB at 855 pieces. Selection should account for supply chain requirements and lead time considerations.

Frequently Asked Questions (FAQ)

Q: Can CRCW08053R00FNEA directly replace CRCW08053R00FNEB? A: Yes. Both are Vishay Dale products with identical electrical specifications, tolerance, power rating, package, temperature range, and AEC-Q200 qualification. They are direct equivalents.

Q: Is RMCF0805FT3R00 a suitable substitute for CRCW08053R00FNEB? A: Yes, electrically and functionally. The RMCF0805FT3R00 meets all electrical and compliance requirements. However, its maximum seated height is 0.026" (0.65mm) versus 0.020" (0.50mm) for the Vishay parts. Verify PCB layout clearances before substitution.

Q: Are all three parts AEC-Q200 qualified? A: Yes. All three parts carry AEC-Q200 automotive qualification and are suitable for automotive applications requiring this standard.

Q: Do these parts have the same moisture sensitivity rating? A: Yes. All three parts are MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: What is the key difference between these substitute parts? A: The primary difference is manufacturer (Vishay Dale versus Stackpole Electronics) and seated height. Electrical performance, tolerance, power rating, temperature range, and automotive qualification are identical across all three parts.

Q: Are all parts ROHS3 compliant? A: Yes. All three parts are ROHS3 compliant and meet environmental regulatory requirements.