CRCW08053K00FKEB Equivalent & Substitute Parts

Part Overview

The CRCW08053K00FKEB is a 3 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This part is rated for automotive applications under AEC-Q200 and operates across -55°C to 155°C. The part is currently discontinued at DiGi Electronics, necessitating identification of equivalent alternatives that maintain identical electrical and mechanical specifications for seamless circuit board integration.

Substiute Parts

CRCW08053K00FKEB

Vishay DaleIn Stock: 987CRCW08053K00FKEB Datasheet

Current PartRFQ

CRCW08053K00FKEA

Vishay DaleIn Stock: 50878CRCW08053K00FKEA Datasheet

DirectRFQ

CRCW08053K00FKEC

Vishay DaleIn Stock: 974CRCW08053K00FKEC Datasheet

DirectRFQ

CRCW08053K00FKTC

Vishay DaleIn Stock: 793CRCW08053K00FKTC Datasheet

DirectRFQ

CRCW08053K00FKEAC

Vishay DaleIn Stock: 72186CRCW08053K00FKEAC Datasheet

MFR RecommendedRFQ

ERJ-6ENF3001V

Panasonic Electronic ComponentsIn Stock: 315724ERJ-6ENF3001V Datasheet

DirectRFQ

RMCF0805FT3K00

Stackpole Electronics IncIn Stock: 37695RMCF0805FT3K00 Datasheet

DirectRFQ

KTR10EZPF3001

Rohm SemiconductorIn Stock: 5577KTR10EZPF3001 Datasheet

UpgradeRFQ

CR0805-FX-3001ELF

Bourns Inc.In Stock: 17325CR0805-FX-3001ELF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW08053K00FKEB is determined by strict equivalence across the following parameters: resistance value (3 kOhms), tolerance (±1%), power rating (0.125W), package type (0805), composition (thick film), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). All substitute parts listed maintain these core electrical and mechanical specifications. Packaging format variations (Tape & Reel versus Cut Tape) do not affect functional equivalence. RoHS compliance status is noted where applicable but does not preclude substitution in non-restricted applications.

Parameter Comparison

Engineering Selection Recommendations

For applications requiring ROHS3 compliance and active product status, CRCW08053K00FKEA, CRCW08053K00FKEC, CRCW08053K00FKEAC, ERJ-6ENF3001V, RMCF0805FT3K00, KTR10EZPF3001, and CR0805-FX-3001ELF are all suitable direct replacements. CRCW08053K00FKEA and CRCW08053K00FKEAC are preferred first-choice alternatives as they are manufactured by Vishay Dale, the original equipment manufacturer of the discontinued CRCW08053K00FKEB, ensuring design continuity and supply chain consistency.

CRCW08053K00FKTC maintains full electrical and mechanical equivalence but carries RoHS non-compliance status and should be selected only in applications where RoHS restrictions do not apply.

Cross-manufacturer alternatives from Panasonic (ERJ-6ENF3001V), Stackpole (RMCF0805FT3K00), Rohm (KTR10EZPF3001), and Bourns (CR0805-FX-3001ELF) provide functionally identical performance and are suitable for designs requiring multi-source qualification or where preferred suppliers are unavailable.

Frequently Asked Questions (FAQ)

Q: Can CRCW08053K00FKEA be used as a direct replacement for CRCW08053K00FKEB?

A: Yes. Both parts share identical electrical specifications (3 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C to 155°C operating range) and package type (0805). The primary difference is packaging format: CRCW08053K00FKEA is supplied in Cut Tape & Digi-Reel format while CRCW08053K00FKEB was supplied in Tape & Reel format. CRCW08053K00FKEA is currently active in production.

Q: What is the difference between CRCW08053K00FKEC and CRCW08053K00FKEAC?

A: Both parts are electrically and mechanically identical. CRCW08053K00FKEAC is designated as the manufacturer-recommended part and is available in higher inventory quantities. Both are ROHS3 compliant and active in production.

Q: Is CRCW08053K00FKTC suitable for automotive applications?

A: CRCW08053K00FKTC meets all electrical and mechanical specifications for automotive use and maintains AEC-Q200 rating. However, it is RoHS non-compliant. Selection depends on application requirements and regional regulatory constraints.

Q: Can I substitute a Panasonic ERJ-6ENF3001V for the Vishay CRCW08053K00FKEB?

A: Yes. ERJ-6ENF3001V is electrically and mechanically equivalent with identical resistance, tolerance, power rating, package, temperature coefficient, and operating range. Both are ROHS3 compliant and AEC-Q200 rated. Cross-manufacturer substitution is valid for applications where multi-source qualification is acceptable.

Q: What is the significance of the height difference between substitute parts?

A: Height variations (ranging from 0.50mm to 0.70mm seated height maximum) are within standard 0805 package tolerances and do not affect circuit board assembly compatibility or electrical performance. All listed parts are mechanically compatible with standard 0805 footprints.

Q: Are all substitute parts AEC-Q200 rated?

A: CRCW08053K00FKEA, CRCW08053K00FKEC, CRCW08053K00FKTC, ERJ-6ENF3001V, RMCF0805FT3K00, and KTR10EZPF3001 carry AEC-Q200 automotive qualification. CRCW08053K00FKEAC and CR0805-FX-3001ELF do not list AEC-Q200 rating but maintain equivalent electrical and mechanical specifications.