CRCW080533K2FHTAP Equivalent & Substitute Parts

Part Overview

The CRCW080533K2FHTAP is a 33.2 kOhms ±1% 0.125W chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This thick film resistor is designed for automotive applications and meets AEC-Q200 qualification standards. The part is currently active in production with 1010 units available in stock.

Identifying equivalent and substitute parts is necessary when the primary part number becomes unavailable, when supply chain constraints require alternative sourcing, or when design flexibility permits component standardization across manufacturing batches.

Substiute Parts

CRCW080533K2FHTAP

Vishay DaleIn Stock: 1101CRCW080533K2FHTAP Datasheet

Current PartRFQ

CRCW080533K2FHEAP

Vishay DaleIn Stock: 5969CRCW080533K2FHEAP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CRCW080533K2FHTAP is determined by strict equivalence across the following critical parameters:

• Resistance value: 33.2 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• Physical dimensions and termination count

The CRCW080533K2FHEAP meets all these criteria and is classified as a direct manufacturer equivalent from Vishay Dale within the CRCW-P series.

Parameter Comparison

Engineering Selection Recommendations

Both the CRCW080533K2FHTAP and CRCW080533K2FHEAP are electrically and mechanically equivalent 0805 chip resistors with identical electrical specifications and automotive AEC-Q200 qualification.

The primary distinction between these parts is regulatory compliance status. The CRCW080533K2FHEAP carries ROHS3 compliance and REACH unaffected status, whereas the CRCW080533K2FHTAP is RoHS non-compliant and REACH affected. For applications subject to RoHS3 or REACH regulatory requirements, the CRCW080533K2FHEAP is the appropriate selection. The CRCW080533K2FHEAP also offers higher inventory availability at 5867 units compared to 1010 units for the primary part number.

Frequently Asked Questions (FAQ)

Q: Are CRCW080533K2FHTAP and CRCW080533K2FHEAP electrically interchangeable?

A: Yes. Both parts have identical electrical specifications: 33.2 kOhms resistance, ±1% tolerance, 0.125W power rating, ±50ppm/°C temperature coefficient, and -55°C ~ 155°C operating temperature range. Both meet AEC-Q200 automotive qualification.

Q: Are these parts mechanically interchangeable?

A: Yes. Both parts use the 0805 (2012 Metric) package with identical physical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and maximum seated height of 0.020" (0.50mm). They are compatible with the same PCB footprints and assembly processes.

Q: What is the difference between these part numbers?

A: The primary difference is regulatory compliance. The CRCW080533K2FHEAP is ROHS3 compliant and REACH unaffected, while the CRCW080533K2FHTAP is RoHS non-compliant and REACH affected. Both are active production parts from Vishay Dale.

Q: Which part should I select for new designs?

A: Selection depends on regulatory requirements applicable to your application. For designs subject to RoHS3 or REACH regulations, use CRCW080533K2FHEAP. Both parts are suitable for automotive applications meeting AEC-Q200 standards.

Q: Can I use these parts in automotive applications?

A: Yes. Both parts carry AEC-Q200 automotive qualification and are rated for the automotive temperature range of -55°C ~ 155°C.

Q: What is the moisture sensitivity level for these parts?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.