CRCW0805330RFKEBC Equivalent & Substitute Parts

Part Overview

The CRCW0805330RFKEBC is a 330 Ohm ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This component is classified as Active status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are necessary when the primary part experiences supply constraints, inventory limitations, or when design requirements call for alternative certifications such as automotive qualification or enhanced moisture resistance.

Substiute Parts

CRCW0805330RFKEBC

Vishay DaleIn Stock: 1045CRCW0805330RFKEBC Datasheet

Current PartRFQ

CRCW0805330RFKEAC

Vishay DaleIn Stock: 80664CRCW0805330RFKEAC Datasheet

DirectRFQ

CRCW0805330RFKEB

Vishay DaleIn Stock: 17763CRCW0805330RFKEB Datasheet

UpgradeRFQ

CR0805-FX-3300ELF

Bourns Inc.In Stock: 39736CR0805-FX-3300ELF Datasheet

UpgradeRFQ

KTR10EZPF3300

Rohm SemiconductorIn Stock: 10625KTR10EZPF3300 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW0805330RFKEBC is determined by strict equivalence across the following critical parameters: resistance value (330 Ohms), tolerance (±1%), power rating (0.125W), package type (0805), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and compliance certifications (RoHS3, REACH Unaffected). All identified substitute parts meet these core electrical and mechanical requirements. Substitute parts are categorized as direct equivalents or upgrades based on additional features such as automotive AEC-Q200 qualification or moisture-resistant construction, which provide enhanced performance characteristics without altering the fundamental electrical specifications.

Parameter Comparison

Engineering Selection Recommendations

CRCW0805330RFKEAC is a direct equivalent manufactured by Vishay Dale with identical electrical specifications and Active product status. This part is suitable for direct replacement with no design modifications required.

CRCW0805330RFKEB is classified as an upgrade option due to Automotive AEC-Q200 qualification. This part is discontinued at DiGi Electronics and should be selected only when automotive-grade reliability is a design requirement. The height specification differs slightly (0.020" vs. 0.024"), which may impact PCB layout considerations in space-constrained applications.

CR0805-FX-3300ELF is manufactured by Bourns Inc. with Active product status and includes moisture-resistant construction. This part is suitable for applications requiring enhanced environmental protection while maintaining all core electrical parameters.

KTR10EZPF3300 is manufactured by Rohm Semiconductor with Active product status and includes both Automotive AEC-Q200 qualification and high voltage features. This part is suitable for automotive applications or designs requiring enhanced voltage performance. The height specification (0.026") is marginally higher than the main part.

Frequently Asked Questions (FAQ)

Q: Can CRCW0805330RFKEAC be used as a direct replacement for CRCW0805330RFKEBC?

A: Yes. Both parts are manufactured by Vishay Dale with identical resistance (330 Ohms), tolerance (±1%), power rating (0.125W), package (0805), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and compliance certifications. No design modifications are required.

Q: What is the difference between the main part and CRCW0805330RFKEB?

A: CRCW0805330RFKEB includes Automotive AEC-Q200 qualification, making it suitable for automotive applications. However, this part is discontinued at DiGi Electronics. The seated height is 0.020" compared to 0.024" for the main part. Select this part only if automotive qualification is a design requirement.

Q: When should CR0805-FX-3300ELF be selected?

A: CR0805-FX-3300ELF is manufactured by Bourns Inc. and includes moisture-resistant construction. Select this part for applications requiring enhanced environmental protection or when Bourns components are preferred in the design. All electrical specifications remain equivalent to the main part.

Q: Is KTR10EZPF3300 suitable for automotive applications?

A: Yes. KTR10EZPF3300 is manufactured by Rohm Semiconductor and includes Automotive AEC-Q200 qualification and high voltage features. This part is Active and suitable for automotive designs. The seated height is 0.026", which is slightly higher than the main part.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 Compliant with REACH Unaffected status, matching the compliance profile of the main part CRCW0805330RFKEBC.

Q: Do package dimensions differ between substitute parts?

A: All parts use the 0805 (2012 Metric) package with identical length (0.079") and width (0.049"). Seated height varies slightly: CRCW0805330RFKEBC and CR0805-FX-3300ELF are 0.024", CRCW0805330RFKEB is 0.020", and KTR10EZPF3300 is 0.026". These variations are within standard PCB assembly tolerances for 0805 components.