CRCW08052R20FNTA Equivalent & Substitute Parts

Part Overview

The CRCW08052R20FNTA is a 2.2 Ohm ±1% 0.125W (1/8W) chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This thick film resistor is rated for automotive applications under AEC-Q200 standard with an operating temperature range of -55°C to 155°C. The part is currently active in production. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity across multiple manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

CRCW08052R20FNTA

Vishay DaleIn Stock: 1064CRCW08052R20FNTA Datasheet

Current PartRFQ

CRCW08052R20FNEA

Vishay DaleIn Stock: 13846CRCW08052R20FNEA Datasheet

DirectRFQ

RMCF0805FT2R20

Stackpole Electronics IncIn Stock: 242095RMCF0805FT2R20 Datasheet

DirectRFQ

AC0805FR-072R2L

YAGEOIn Stock: 42400AC0805FR-072R2L Datasheet

UpgradeRFQ

RC0805FR-072R2L

YAGEOIn Stock: 77294RC0805FR-072R2L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW08052R20FNTA is determined by strict equivalence across the following critical parameters:

• Resistance value: 2.2 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C to 155°C
• Moisture sensitivity level: MSL 1 (Unlimited)
• Number of terminations: 2

All substitute parts listed below meet these electrical and mechanical specifications. Variations in physical dimensions (height seated maximum), packaging format (Tape & Reel vs. Cut Tape), RoHS compliance status, and REACH classification do not affect functional interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain full electrical and mechanical compatibility with the CRCW08052R20FNTA across the specified operating parameters.

CRCW08052R20FNEA (Vishay Dale) is a direct manufacturer equivalent with identical specifications and packaging format. This part is suitable for direct replacement in applications requiring Vishay Dale sourcing or inventory continuity.

RMCF0805FT2R20 (Stackpole Electronics Inc) and AC0805FR-072R2L (YAGEO) are functionally equivalent alternatives. Both are AEC-Q200 rated and available in high inventory quantities. The RMCF0805FT2R20 has a maximum seated height of 0.65mm compared to 0.50mm for the original part; the AC0805FR-072R2L has a maximum seated height of 0.60mm. These dimensional variations remain within standard 0805 package tolerances and do not affect PCB assembly compatibility.

RC0805FR-072R2L (YAGEO) is functionally equivalent but does not carry AEC-Q200 automotive certification. This part is suitable for non-automotive applications or where automotive qualification is not required. It is available in Cut Tape and Digi-Reel packaging formats.

RoHS and REACH compliance status varies across manufacturers. CRCW08052R20FNTA is RoHS non-compliant and REACH Affected. All substitute parts listed are ROHS3 Compliant and REACH Unaffected, providing improved environmental compliance for new designs.

Frequently Asked Questions (FAQ)

Q: Can CRCW08052R20FNEA be used as a direct replacement for CRCW08052R20FNTA?

A: Yes. Both parts are manufactured by Vishay Dale with identical electrical specifications (2.2 Ω ±1%, 0.125W), package (0805), temperature coefficient (±200ppm/°C), operating range (-55°C to 155°C), and AEC-Q200 rating. The primary difference is RoHS compliance status (FNEA is ROHS3 Compliant; FNTA is non-compliant).

Q: What is the significance of the height difference between CRCW08052R20FNTA (0.50mm) and RMCF0805FT2R20 (0.65mm)?

A: Both dimensions fall within standard 0805 (2012 Metric) package specifications. The 0.15mm height variation does not affect PCB assembly, reflow soldering, or circuit performance. Component placement and routing remain compatible.

Q: Is RC0805FR-072R2L suitable for automotive applications?

A: RC0805FR-072R2L does not carry AEC-Q200 automotive certification. It is suitable for consumer, industrial, and non-automotive applications. For automotive designs requiring AEC-Q200 qualification, use CRCW08052R20FNTA, CRCW08052R20FNEA, RMCF0805FT2R20, or AC0805FR-072R2L.

Q: What packaging formats are available among the substitute parts?

A: CRCW08052R20FNTA, CRCW08052R20FNEA, RMCF0805FT2R20, and AC0805FR-072R2L are supplied in Tape & Reel (TR) format. RC0805FR-072R2L is available in Cut Tape (CT) and Digi-Reel format. Packaging selection depends on assembly equipment and procurement volume requirements.

Q: Are all substitute parts MSL 1 rated?

A: Yes. All parts listed, including the main part CRCW08052R20FNTA, are MSL 1 (Unlimited) rated, indicating no moisture sensitivity restrictions for storage or handling.

Q: What is the basis for substitution compatibility?

A: Substitution is based on equivalence across resistance value, tolerance, power rating, package type, composition, temperature coefficient, operating temperature range, and moisture sensitivity level. All listed parts meet these criteria and are electrically and mechanically interchangeable in circuit applications.