CRCW0805220KJNEC Equivalent & Substitute Parts

Part Overview

The CRCW0805220KJNEC is a 220 kOhms ±5% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This component is rated for automotive applications under AEC-Q200 standard with an operating temperature range of -55°C to 155°C. The part is currently active in production with 916 units in stock. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility is required while maintaining electrical and mechanical compatibility.

Substiute Parts

CRCW0805220KJNEC

Vishay DaleIn Stock: 960CRCW0805220KJNEC Datasheet

Current PartRFQ

CRCW0805220KJNEA

Vishay DaleIn Stock: 17720CRCW0805220KJNEA Datasheet

DirectRFQ

ERJ-6GEYJ224V

Panasonic Electronic ComponentsIn Stock: 87657ERJ-6GEYJ224V Datasheet

DirectRFQ

RMCF0805JG220K

Stackpole Electronics IncIn Stock: 844RMCF0805JG220K Datasheet

DirectRFQ

RMCF0805JT220K

Stackpole Electronics IncIn Stock: 99178RMCF0805JT220K Datasheet

DirectRFQ

CR0805-JW-224ELF

Bourns Inc.In Stock: 46203CR0805-JW-224ELF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW0805220KJNEC is determined by strict equivalence across the following parameters:

• Resistance value: 220 kOhms
• Tolerance: ±5%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C to 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

All substitute parts listed maintain these electrical and mechanical specifications. Variations in physical dimensions (height, length, width) within the 0805 package specification do not affect substitutability. Automotive AEC-Q200 rating is present in most substitutes; however, the Bourns CR0805-JW-224ELF carries moisture-resistant features instead of explicit AEC-Q200 designation while meeting all other electrical requirements.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are active production components with ROHS3 compliance and MSL 1 rating. Selection among substitutes should be based on:

Vishay Dale CRCW0805220KJNEA: Direct manufacturer variant with highest inventory availability (17,644 units). Identical electrical specifications and physical dimensions to the primary part. Recommended for immediate availability and supply chain continuity within the same manufacturer family.

Panasonic ERJ-6GEYJ224V: Highest inventory level (87,586 units) among all substitutes. Maintains all electrical parameters with maximum seated height of 0.028" (0.70mm), which remains within 0805 package tolerance. Suitable for applications where extended component availability is prioritized.

Stackpole RMCF0805JT220K: Largest inventory among Stackpole variants (99,135 units) with 0.026" (0.65mm) seated height. Provides supply security and alternative sourcing from established automotive-qualified manufacturer.

Stackpole RMCF0805JG220K: Lower inventory (782 units) but maintains full electrical and mechanical equivalence. Suitable as secondary alternative when primary substitutes are unavailable.

Bourns CR0805-JW-224ELF: Moisture-resistant thick film composition with 0.024" (0.60mm) seated height. Carries ROHS3 compliance and MSL 1 rating. Recommended for applications requiring enhanced moisture protection, with 46,095 units in stock.

Frequently Asked Questions (FAQ)

Q: Can CRCW0805220KJNEA be used as a direct replacement for CRCW0805220KJNEC?

A: Yes. Both parts are manufactured by Vishay Dale with identical electrical specifications (220 kΩ ±5%, 0.125W), temperature coefficient (±200ppm/°C), operating range (-55°C to 155°C), and physical package (0805). The only difference is the internal manufacturing code suffix. They are functionally and mechanically interchangeable.

Q: Are there differences in height between substitute parts?

A: Yes. Physical heights vary slightly within the 0805 package specification: CRCW0805220KJNEC and CRCW0805220KJNEA measure 0.020" (0.50mm), CR0805-JW-224ELF measures 0.024" (0.60mm), RMCF variants measure 0.026" (0.65mm), and ERJ-6GEYJ224V measures 0.028" (0.70mm). All heights remain within 0805 package tolerance and do not affect PCB assembly compatibility.

Q: Do all substitutes meet automotive AEC-Q200 requirements?

A: Four of five substitutes carry explicit AEC-Q200 automotive rating (CRCW0805220KJNEA, ERJ-6GEYJ224V, RMCF0805JG220K, RMCF0805JT220K). The Bourns CR0805-JW-224ELF is rated for moisture-resistant applications and maintains equivalent electrical performance and temperature range, though it does not carry the AEC-Q200 designation.

Q: What is the difference between RMCF0805JG220K and RMCF0805JT220K?

A: Both Stackpole parts are electrically and mechanically identical with 220 kΩ ±5% resistance, 0.125W power rating, and 0.026" (0.65mm) seated height. The internal designation difference (JG vs. JT) reflects manufacturing process variants. Selection between them should be based on inventory availability and supplier preference.

Q: Are all substitutes ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance certification and MSL 1 (Unlimited) moisture sensitivity level, matching the primary CRCW0805220KJNEC specification.

Q: Which substitute offers the best supply availability?

A: Stackpole RMCF0805JT220K provides the highest inventory level at 99,135 units, followed by Panasonic ERJ-6GEYJ224V at 87,586 units. Both represent strong supply security for production requirements.