CRCW0805150KFHTAP Equivalent & Substitute Parts

Part Overview

The CRCW0805150KFHTAP is a 150 kOhms ±1% 0.125W chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This thick film resistor is designed for automotive applications and meets AEC-Q200 qualification standards. The part is currently active in production with 633 pieces available in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, supply chain considerations, or specific compliance requirements.

Substiute Parts

CRCW0805150KFHTAP

Vishay DaleIn Stock: 729CRCW0805150KFHTAP Datasheet

Current PartRFQ

CRCW0805150KFHEAP

Vishay DaleIn Stock: 5927CRCW0805150KFHEAP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW0805150KFHTAP is determined by strict equivalence across the following critical parameters:

• Resistance value: 150 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• Termination count: 2
• Physical dimensions and height specifications

The identified substitute part CRCW0805150KFHEAP meets all electrical and mechanical requirements for direct substitution. Both parts are manufactured by Vishay Dale within the CRCW-P series and maintain identical functional specifications.

Parameter Comparison

Engineering Selection Recommendations

Both CRCW0805150KFHTAP and CRCW0805150KFHEAP are functionally equivalent for applications requiring a 150 kOhms ±1% 0.125W 0805 thick film resistor with AEC-Q200 automotive qualification.

The CRCW0805150KFHEAP substitute offers higher inventory availability (5890 pieces versus 633 pieces) and provides improved compliance status. The substitute part is ROHS3 compliant and REACH unaffected, whereas the main part is RoHS non-compliant and REACH affected. Both parts share identical electrical performance, thermal characteristics, and mechanical specifications.

Selection between these parts should be based on compliance requirements for the end application and supply chain availability. The substitute part is suitable for applications where RoHS3 compliance and REACH unaffected status are required.

Frequently Asked Questions (FAQ)

Q: Can CRCW0805150KFHEAP be used as a direct replacement for CRCW0805150KFHTAP?

A: Yes. Both parts are electrically and mechanically equivalent. They share identical resistance value (150 kOhms), tolerance (±1%), power rating (0.125W), package (0805), composition (thick film), temperature coefficient (±50ppm/°C), operating temperature range (-55°C ~ 155°C), and AEC-Q200 automotive qualification. Physical dimensions and termination specifications are identical.

Q: What are the key differences between these two parts?

A: The primary differences are compliance status and inventory levels. CRCW0805150KFHEAP is ROHS3 compliant and REACH unaffected, while CRCW0805150KFHTAP is RoHS non-compliant and REACH affected. CRCW0805150KFHEAP has significantly higher stock availability (5890 pieces versus 633 pieces).

Q: Are there any package or footprint differences?

A: No. Both parts use the 0805 (2012 Metric) package with identical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and maximum seated height (0.020" / 0.50mm). PCB footprints are interchangeable.

Q: Which part should be selected for new designs?

A: Selection depends on compliance requirements. For applications requiring RoHS3 compliance and REACH unaffected status, CRCW0805150KFHEAP is the appropriate choice. Both parts meet AEC-Q200 automotive standards and are suitable for automotive applications.

Q: Are the thermal and electrical characteristics identical?

A: Yes. Both parts have identical temperature coefficient (±50ppm/°C), operating temperature range (-55°C ~ 155°C), and all electrical specifications. Thermal performance in circuit applications is equivalent.