CRCW04028R87FKTD Equivalent & Substitute Parts

Part Overview

The CRCW04028R87FKTD is a 0402 (1005 Metric) chip resistor manufactured by Vishay Dale with a resistance value of 8.87 Ohms at ±1% tolerance and 0.063W (1/16W) power rating. This thick film resistor is qualified to AEC-Q200 automotive standards and operates across the temperature range of -55°C to 155°C. The part is currently in active production status. Substitute parts are identified to address inventory availability, compliance requirements, or packaging preferences while maintaining identical electrical and mechanical specifications.

Substiute Parts

CRCW04028R87FKTD

Vishay DaleIn Stock: 1185CRCW04028R87FKTD Datasheet

Current PartRFQ

CRCW04028R87FKED

Vishay DaleIn Stock: 24176CRCW04028R87FKED Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW04028R87FKTD is determined by the following critical parameters:

• Resistance value: 8.87 Ohms
• Tolerance: ±1%
• Power rating: 0.063W (1/16W)
• Package: 0402 (1005 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C
• Automotive qualification: AEC-Q200
• Termination count: 2
• Moisture sensitivity: MSL 1

The substitute part CRCW04028R87FKED matches all electrical and mechanical parameters. Differences exist only in packaging format and regulatory compliance status, which do not affect functional interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both CRCW04028R87FKTD and CRCW04028R87FKED are functionally equivalent for circuit applications requiring 8.87 Ohm resistors with 1% tolerance in 0402 package format. Selection between these parts should be based on regulatory and compliance requirements:

The CRCW04028R87FKED offers ROHS3 compliance and REACH unaffected status, making it suitable for applications subject to European Union environmental directives and RoHS regulations. The CRCW04028R87FKTD remains available for applications where RoHS non-compliance is acceptable or where legacy design requirements specify this variant.

Both parts maintain identical electrical performance, thermal characteristics, and automotive AEC-Q200 qualification across the full operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can CRCW04028R87FKED be used as a direct replacement for CRCW04028R87FKTD?

A: Yes. Both parts are electrically and mechanically identical. They share the same resistance value (8.87 Ohms), tolerance (±1%), power rating (0.063W), package (0402), and thermal specifications. The primary difference is regulatory compliance status.

Q: What is the significance of the RoHS and REACH compliance differences?

A: CRCW04028R87FKED is ROHS3 compliant and REACH unaffected, meeting current European Union environmental standards. CRCW04028R87FKTD is RoHS non-compliant and REACH affected. Selection depends on end-product regulatory requirements and target markets.

Q: Are both parts suitable for automotive applications?

A: Yes. Both CRCW04028R87FKTD and CRCW04028R87FKED carry AEC-Q200 automotive qualification and operate across -55°C to 155°C, meeting automotive temperature and reliability requirements.

Q: What does MSL 1 (Unlimited) moisture sensitivity mean?

A: MSL 1 indicates the lowest moisture sensitivity level. Both parts have unlimited shelf life under standard storage conditions and do not require special moisture control during handling or storage.

Q: Are there any package or form factor differences between these parts?

A: No. Both parts use identical 0402 (1005 Metric) package dimensions: 0.039" L × 0.020" W (1.00mm × 0.50mm) with maximum seated height of 0.016" (0.40mm). Both are supplied in Tape & Reel format.