CRCW040230K1FHTDP Equivalent & Substitute Parts

Part Overview

The CRCW040230K1FHTDP is a 30.1 kOhms ±1% chip resistor manufactured by Vishay Dale in 0402 (1005 Metric) package format. This thick film resistor is rated for 0.063W (1/16W) power dissipation and meets AEC-Q200 automotive qualification standards. The component is currently in active production status with 1030 pieces available in inventory. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package and performance envelope.

Substiute Parts

CRCW040230K1FHTDP

Vishay DaleIn Stock: 1117CRCW040230K1FHTDP Datasheet

Current PartRFQ

RE0402FRE0730K1L

YAGEOIn Stock: 10796RE0402FRE0730K1L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW040230K1FHTDP is determined by strict equivalence across the following parameters:

• Resistance value: 30.1 kOhms
• Tolerance: ±1%
• Power rating: 0.063W (1/16W)
• Package format: 0402 (1005 Metric)
• Composition: Thick Film
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -55°C to 155°C
• Moisture sensitivity: MSL 1 or better

The identified substitute part RE0402FRE0730K1L from YAGEO meets all electrical and mechanical requirements for direct substitution in applications requiring the CRCW040230K1FHTDP specification.

Parameter Comparison

Engineering Selection Recommendations

Both the CRCW040230K1FHTDP and RE0402FRE0730K1L are active production components with identical electrical specifications and mechanical compatibility. Selection between these parts should be based on the following factors:

The CRCW040230K1FHTDP carries AEC-Q200 automotive qualification, making it the specified choice for applications requiring automotive-grade reliability certification. The RE0402FRE0730K1L from YAGEO achieves ROHS3 compliance, whereas the Vishay Dale part is RoHS non-compliant. Applications subject to RoHS regulatory requirements must use the YAGEO substitute. Both components are available in production quantities with adequate inventory levels.

Frequently Asked Questions (FAQ)

Q: Can RE0402FRE0730K1L replace CRCW040230K1FHTDP in automotive applications?

A: The RE0402FRE0730K1L meets all electrical and mechanical specifications for functional equivalence. However, the CRCW040230K1FHTDP carries AEC-Q200 automotive qualification. Use of the YAGEO substitute in automotive applications requires evaluation against your specific qualification requirements.

Q: Are there physical compatibility concerns between these parts?

A: Both components use the 0402 (1005 Metric) package with identical footprints. The seated height difference (0.40mm vs 0.37mm maximum) is within standard PCB assembly tolerances and does not affect placement or soldering.

Q: What is the difference in RoHS compliance between these parts?

A: The CRCW040230K1FHTDP is RoHS non-compliant. The RE0402FRE0730K1L is ROHS3 compliant. Applications subject to RoHS directives must use the YAGEO part.

Q: Are both parts available in the same packaging format?

A: Yes. Both the CRCW040230K1FHTDP and RE0402FRE0730K1L are supplied in Tape & Reel (TR) packaging suitable for automated assembly processes.

Q: What determines substitution eligibility for this resistor?

A: Substitution is based on matching resistance value (30.1 kOhms), tolerance (±1%), power rating (0.063W), package format (0402), composition (thick film), temperature coefficient (±50ppm/°C), operating temperature range (-55°C to 155°C), and moisture sensitivity level (MSL 1).