CRCW020182K0FNED Equivalent & Substitute Parts

Part Overview

The CRCW020182K0FNED is an 82 kOhms ±1% thick film chip resistor in 0201 package format, rated at 0.05W (1/20W) power dissipation. Manufactured by Vishay Dale, this component is actively produced and widely used in compact electronic assemblies where space constraints demand miniaturized passive components. The part is ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1), making it suitable for standard industrial and commercial applications. Equivalent and substitute parts are identified based on matching electrical specifications, package dimensions, and environmental ratings to ensure direct functional interchangeability in circuit designs.

Substiute Parts

CRCW020182K0FNED

Vishay DaleIn Stock: 5581CRCW020182K0FNED Datasheet

Current PartRFQ

CRCW020182K0FKED

Vishay DaleIn Stock: 12901CRCW020182K0FKED Datasheet

UpgradeRFQ

RMCF0201FT82K0

Stackpole Electronics IncIn Stock: 762RMCF0201FT82K0 Datasheet

DirectRFQ

RC0603F823CS

Samsung Electro-MechanicsIn Stock: 6598RC0603F823CS Datasheet

UpgradeRFQ

ERJ-1GNF8202C

Panasonic Electronic ComponentsIn Stock: 42039ERJ-1GNF8202C Datasheet

MFR RecommendedRFQ

RC0201FR-0782KL

YAGEOIn Stock: 92774RC0201FR-0782KL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW020182K0FNED is determined by the following critical parameters:

• Resistance Value: 82 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power Rating: 0.05W / 1/20W (exact match required)
• Package Format: 0201 (0603 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Operating Temperature Range: Minimum -55°C to +125°C or higher
• RoHS Compliance: ROHS3 Compliant (required)
• Moisture Sensitivity: MSL 1 (required)

All identified substitute parts meet these core electrical and mechanical criteria. Secondary parameters such as temperature coefficient, packaging format (Tape & Reel vs. Cut Tape), and manufacturer-specific features do not restrict substitution but may influence procurement or assembly considerations.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are ROHS3 compliant and carry MSL 1 rating, confirming suitability for standard manufacturing and storage conditions without moisture bake-out requirements. Selection among substitutes should be based on:

Packaging Format: The CRCW020182K0FNED is supplied in Tape & Reel format. The CRCW020182K0FKED variant offers Cut Tape & Digi-Reel packaging from the same manufacturer. Both formats are compatible with standard pick-and-place assembly equipment.

Temperature Coefficient Stability: The CRCW020182K0FNED and RMCF0201FT82K0 both specify ±200ppm/°C. The CRCW020182K0FKED offers improved stability at ±100ppm/°C. The RC0603F823CS and RC0201FR-0782KL specify ±250ppm/°C and ±200ppm/°C respectively. Selection depends on circuit tolerance requirements.

Operating Temperature Range: The CRCW020182K0FNED supports -55°C to +155°C. The CRCW020182K0FKED matches this range. The RMCF0201FT82K0 also supports -55°C to +155°C. The RC0603F823CS, ERJ-1GNF8202C, and RC0201FR-0782KL are rated to -55°C to +125°C, which is suitable for most commercial and industrial applications but does not extend to the upper temperature limit of the primary part.

Inventory Availability: Substitute parts show varying stock levels. Selection may be influenced by supply chain requirements and lead time considerations.

Frequently Asked Questions (FAQ)

Q: Can CRCW020182K0FKED be used as a direct replacement for CRCW020182K0FNED?

A: Yes. Both parts are manufactured by Vishay Dale with identical electrical specifications (82 kOhms, ±1%, 0.05W, 0201 package). The primary difference is packaging format (Tape & Reel vs. Cut Tape & Digi-Reel) and temperature coefficient (±100ppm/°C vs. ±200ppm/°C). The improved temperature coefficient of the FKED variant makes it functionally superior for precision applications.

Q: Are moisture-resistant variants available?

A: Yes. The RC0603F823CS (Samsung Electro-Mechanics) and RC0201FR-0782KL (YAGEO) are specified as moisture-resistant thick film resistors. These variants provide enhanced protection in humid environments while maintaining identical electrical specifications.

Q: What is the impact of different temperature coefficients on circuit performance?

A: Temperature coefficient determines resistance drift over the operating temperature range. The CRCW020182K0FKED (±100ppm/°C) exhibits the lowest drift, followed by parts rated ±200ppm/°C (CRCW020182K0FNED, RMCF0201FT82K0, ERJ-1GNF8202C, RC0201FR-0782KL), and RC0603F823CS (±250ppm/°C). For circuits requiring high precision across temperature extremes, lower temperature coefficients are preferred.

Q: Are all substitute parts suitable for high-temperature applications above 125°C?

A: No. Only the CRCW020182K0FNED and RMCF0201FT82K0 are rated to +155°C. The CRCW020182K0FKED also supports +155°C. The RC0603F823CS, ERJ-1GNF8202C, and RC0201FR-0782KL are limited to +125°C maximum operating temperature. Application requirements must be verified before selection.

Q: Does packaging format affect electrical performance?

A: No. Tape & Reel and Cut Tape formats are packaging and delivery methods only. Electrical performance is identical. Selection should be based on assembly equipment compatibility and procurement workflow.

Q: Are all parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance certification and MSL 1 rating, confirming compliance with current environmental and manufacturing standards.