CRCW02012K32FNED Equivalent & Substitute Parts

Part Overview

The CRCW02012K32FNED is a 2.32 kOhms ±1% thick film chip resistor in 0201 package format, rated at 0.05W (1/20W) power dissipation. Manufactured by Vishay Dale, this component is actively produced and widely used in compact electronic assemblies where space constraints demand miniature passive components. Substitute parts are identified to address supply chain continuity, inventory availability, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

CRCW02012K32FNED

Vishay DaleIn Stock: 7683CRCW02012K32FNED Datasheet

Current PartRFQ

CRCW02012K32FKED

Vishay DaleIn Stock: 7555CRCW02012K32FKED Datasheet

UpgradeRFQ

RMCF0201FT2K32

Stackpole Electronics IncIn Stock: 15389RMCF0201FT2K32 Datasheet

DirectRFQ

ERJ-1GNF2321C

Panasonic Electronic ComponentsIn Stock: 65666ERJ-1GNF2321C Datasheet

MFR RecommendedRFQ

RC0201FR-072K32L

YAGEOIn Stock: 17453RC0201FR-072K32L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CRCW02012K32FNED is determined by strict equivalence across the following parameters:

• Resistance value: 2.32 kOhms
• Tolerance: ±1%
• Power rating: 0.05W (1/20W)
• Package format: 0201 (0603 Metric)
• Composition: Thick Film
• Termination count: 2
• RoHS compliance: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

All identified substitute parts meet these core electrical and mechanical requirements. Variations in temperature coefficient, maximum operating temperature, or height-seated dimensions do not preclude substitution when the above parameters are matched.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are actively produced and ROHS3 compliant, ensuring regulatory compliance and supply chain viability. Selection between equivalent parts should be based on:

• Inventory availability and lead time requirements
• Preferred supplier relationships and procurement channels
• Temperature coefficient tolerance if circuit design specifies tighter stability requirements (CRCW02012K32FKED offers ±100ppm/°C versus ±200ppm/°C for other options)
• Maximum operating temperature ceiling (CRCW02012K32FNED and RMCF0201FT2K32 support -55°C ~ 155°C; ERJ-1GNF2321C and RC0201FR-072K32L support -55°C ~ 125°C)
• Physical height constraints in PCB assembly (RMCF0201FT2K32 maximum height 0.011" versus 0.010" for other variants)

Frequently Asked Questions (FAQ)

Q: Can CRCW02012K32FKED replace CRCW02012K32FNED in all applications?

A: Yes. Both parts are electrically and mechanically equivalent. CRCW02012K32FKED features a tighter temperature coefficient (±100ppm/°C versus ±200ppm/°C), making it suitable for applications requiring enhanced temperature stability.

Q: What is the difference between RMCF0201FT2K32 and other substitutes?

A: RMCF0201FT2K32 is manufactured by Stackpole Electronics and carries AEC-Q200 automotive qualification. Its maximum seated height is 0.011" compared to 0.010" for most alternatives. This minor dimensional difference is within standard PCB assembly tolerances for 0201 packages.

Q: Are ERJ-1GNF2321C and RC0201FR-072K32L suitable for high-temperature applications?

A: Both parts operate to -55°C ~ 125°C, which is 30°C lower than CRCW02012K32FNED and RMCF0201FT2K32. For applications requiring operation above 125°C, select CRCW02012K32FNED, CRCW02012K32FKED, or RMCF0201FT2K32.

Q: Does RC0201FR-072K32L offer any additional features?

A: RC0201FR-072K32L is specified as moisture resistant thick film, providing enhanced protection in humid environments compared to standard thick film compositions.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All listed substitute parts are supplied in Tape & Reel (TR) format, suitable for automated PCB assembly processes.