CRCW02011K00FNEE Equivalent & Substitute Parts

Part Overview

The CRCW02011K00FNEE is a 1 kOhms ±1% thick film chip resistor in 0201 package format, rated at 0.05W (1/20W) power dissipation. Manufactured by Vishay Dale, this component is classified as Active product status with full RoHS3 compliance. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings align with the original component, enabling direct replacement in circuit designs without performance degradation.

Substiute Parts

CRCW02011K00FNEE

Vishay DaleIn Stock: 873CRCW02011K00FNEE Datasheet

Current PartRFQ

CR0201-FW-1001GLF

Bourns Inc.In Stock: 30347CR0201-FW-1001GLF Datasheet

DirectRFQ

CRG0201F1K0

TE Connectivity Passive ProductIn Stock: 799CRG0201F1K0 Datasheet

DirectRFQ

RMCF0201FT1K00

Stackpole Electronics IncIn Stock: 721308RMCF0201FT1K00 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CRCW02011K00FNEE are qualified based on the following criteria:

Electrical Parameters: Resistance value (1 kOhms), tolerance (±1%), power rating (0.05W), and temperature coefficient (±200ppm/°C) must match exactly.

Mechanical Parameters: Package format (0201), physical dimensions (0.024" L x 0.012" W / 0.60mm x 0.30mm), and termination count (2) must be identical.

Environmental & Compliance: Operating temperature range must support the application requirements, RoHS3 compliance must be maintained, and MSL rating must be 1 (Unlimited).

Composition: Thick film construction ensures consistent performance characteristics across substitutes.

All identified substitute parts meet these criteria and are suitable for direct replacement in the same circuit application.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain Active product status and full RoHS3 compliance, ensuring regulatory conformance and long-term component availability. Selection between substitutes should be based on the following factors:

Operating Temperature Requirement: The CR0201-FW-1001GLF (Bourns Inc.) operates within -55°C ~ 125°C range. Applications requiring operation above 125°C should use CRCW02011K00FNEE (Vishay Dale), CRG0201F1K0 (TE Connectivity), or RMCF0201FT1K00 (Stackpole Electronics), all rated to 155°C.

Packaging Format: RMCF0201FT1K00 is supplied in Cut Tape (CT) & Digi-Reel® format, while other substitutes use Tape & Reel (TR) packaging. Packaging selection depends on assembly process requirements and inventory management practices.

Height Clearance: RMCF0201FT1K00 has a maximum seated height of 0.011" (0.28mm) compared to 0.010" (0.26mm) for other parts. Applications with tight vertical space constraints should verify compatibility with this 0.001" difference.

Inventory Availability: RMCF0201FT1K00 (Stackpole Electronics) offers the highest inventory level at 721,228 pieces, followed by CR0201-FW-1001GLF (Bourns Inc.) at 30,240 pieces.

Frequently Asked Questions (FAQ)

Q: Can CR0201-FW-1001GLF replace CRCW02011K00FNEE in all applications?

A: CR0201-FW-1001GLF is suitable for applications operating within -55°C ~ 125°C. If your circuit requires operation above 125°C, use CRG0201F1K0, RMCF0201FT1K00, or the original CRCW02011K00FNEE, all rated to 155°C.

Q: Are all substitute parts mechanically compatible with the original component?

A: Yes. All substitutes share identical length (0.024" / 0.60mm) and width (0.012" / 0.30mm) dimensions. RMCF0201FT1K00 has a maximum seated height of 0.011" (0.28mm) versus 0.010" (0.26mm) for others. Verify clearance in applications with height constraints below 0.011".

Q: Do substitute parts require different soldering profiles or assembly procedures?

A: No. All substitutes use identical 0201 package format with 2 terminations, thick film composition, and MSL 1 rating. Standard SMD assembly processes apply without modification.

Q: What is the significance of the ±200ppm/°C temperature coefficient across all parts?

A: The temperature coefficient indicates resistance value drift with temperature changes. All parts maintain ±200ppm/°C, ensuring consistent performance across the operating temperature range. This specification is critical for precision analog circuits and should not be compromised during substitution.

Q: Are all parts RoHS3 compliant?

A: Yes. All listed parts, including the original CRCW02011K00FNEE and all substitutes, are ROHS3 Compliant with MSL 1 (Unlimited) moisture sensitivity rating, meeting current environmental and regulatory requirements.