CRCW010010R0JREL Equivalent & Substitute Parts

Part Overview

The CRCW010010R0JREL is a 10 Ohm ±5% thick film chip resistor manufactured by Vishay Dale in the 01005 (0402 Metric) package format. This component is an active product with full RoHS3 compliance and unlimited moisture sensitivity rating. The part is supplied in Tape & Reel packaging for automated assembly processes. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the specified parameter tolerances for this resistor category.

Substiute Parts

CRCW010010R0JREL

Vishay DaleIn Stock: 967CRCW010010R0JREL Datasheet

Current PartRFQ

CRCW010010R0FREL

Vishay DaleIn Stock: 56803CRCW010010R0FREL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CRCW010010R0JREL are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 10 Ohms
• Power rating: 0.03W (1/32W)
• Temperature coefficient: ±250ppm/°C
• Operating temperature range: -55°C ~ 125°C

Mechanical Parameters (Must Match):

• Package / Case: 01005 (0402 Metric)
• Composition: Thick Film
• Number of terminations: 2

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Tolerance Consideration: Tolerance may vary between substitute parts. The CRCW010010R0JREL specifies ±5% tolerance. Substitute parts with tighter tolerance specifications (such as ±1%) are electrically compatible and represent an upgrade path while maintaining all other electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the CRCW010010R0JREL and CRCW010010R0FREL are active products from Vishay Dale with full ROHS3 compliance and unlimited moisture sensitivity rating. The primary difference is tolerance specification: the main part offers ±5% tolerance, while the substitute offers ±1% tolerance. Both parts maintain identical electrical performance characteristics, mechanical dimensions, and thermal specifications. Selection between these parts depends on circuit tolerance requirements. The CRCW010010R0FREL represents a tighter tolerance option within the same product family and package format.

Frequently Asked Questions (FAQ)

Q: Can CRCW010010R0FREL replace CRCW010010R0JREL in existing designs?

A: Yes. Both parts share identical resistance value (10 Ohms), power rating (0.03W), package format (01005), temperature coefficient (±250ppm/°C), and operating temperature range (-55°C ~ 125°C). The substitute part features tighter tolerance (±1% versus ±5%), which is electrically compatible and represents an upgrade.

Q: What is the significance of tolerance differences between these parts?

A: Tolerance defines the acceptable deviation from the nominal resistance value. The CRCW010010R0JREL allows ±5% deviation (9.5 to 10.5 Ohms), while CRCW010010R0FREL allows ±1% deviation (9.9 to 10.1 Ohms). Applications requiring tighter resistance accuracy should specify the ±1% part.

Q: Are both parts suitable for automated assembly?

A: Yes. Both parts are supplied in Tape & Reel (TR) packaging, which is the standard format for automated pick-and-place assembly equipment.

Q: Do these parts have identical thermal characteristics?

A: Yes. Both parts share the same temperature coefficient (±250ppm/°C) and operating temperature range (-55°C ~ 125°C), ensuring identical thermal performance in circuit applications.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating. Compliance certifications are identical.