CPPLC7L-BP-100.0TS Equivalent & Substitute Parts

Part Overview

The CPPLC7L-BP-100.0TS is a 100 MHz XO (Standard) CMOS oscillator manufactured by Cardinal Components Inc. as part of the FIPO™ CPPL series. This surface mount crystal oscillator operates at 3.3V with enable/disable functionality and is housed in a 4-SMD, No Lead package. The part is Active status and ROHS3 compliant. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory requirements necessitate additional suppliers.

Substiute Parts

CPPLC7L-BP-100.0TS

Cardinal Components Inc.In Stock: 981CPPLC7L-BP-100.0TS Datasheet

Current PartRFQ

SXO75C3A071-100.000M

Suntsu Electronics, Inc.In Stock: 5336SXO75C3A071-100.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CPPLC7L-BP-100.0TS is determined by the following critical parameters:

• Frequency: 100 MHz (exact match required)
• Output Type: CMOS (exact match required)
• Supply Voltage: 3.3V (exact match required)
• Function: Enable/Disable (exact match required)
• Frequency Stability: ±50ppm (exact match required)
• Operating Temperature Range: 0°C ~ 70°C (exact match required)
• Package Type: 4-SMD, No Lead (exact match required)
• Physical Dimensions: 7.00mm x 5.00mm (exact match required)
• Mounting Type: Surface Mount (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)

The SXO75C3A071-100.000M from Suntsu Electronics, Inc. meets all critical substitution parameters and is classified as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the CPPLC7L-BP-100.0TS and SXO75C3A071-100.000M are Active status products with ROHS3 compliance and REACH Unaffected designation. The SXO75C3A071-100.000M is a direct functional equivalent meeting all critical electrical and mechanical specifications. The substitute part exhibits higher maximum supply current (65mA versus 25mA) and a lower seated height (1.60mm versus 1.90mm). Selection between these parts should be based on application-specific requirements regarding power consumption and PCB clearance constraints.

Frequently Asked Questions (FAQ)

Q: Can the SXO75C3A071-100.000M be used as a direct replacement for the CPPLC7L-BP-100.0TS?

A: Yes. Both parts share identical frequency, output type, supply voltage, function, frequency stability, operating temperature range, package type, and physical dimensions. The parts are functionally equivalent for applications requiring a 100 MHz CMOS oscillator with enable/disable capability in a 4-SMD, No Lead package.

Q: What are the differences between these two oscillators?

A: The primary differences are maximum supply current and seated height. The SXO75C3A071-100.000M draws up to 65mA compared to 25mA for the CPPLC7L-BP-100.0TS, and has a maximum seated height of 1.60mm versus 1.90mm. These differences may impact power budget and PCB layout considerations.

Q: Are both parts RoHS compliant?

A: Yes. Both the CPPLC7L-BP-100.0TS and SXO75C3A071-100.000M are ROHS3 compliant and REACH unaffected.

Q: What packaging formats are available for these parts?

A: The CPPLC7L-BP-100.0TS is supplied in Tape & Reel (TR) packaging. The SXO75C3A071-100.000M is supplied in Bulk packaging. Packaging format selection depends on production volume and assembly requirements.

Q: Do these oscillators support enable/disable functionality?

A: Yes. Both parts feature enable/disable function, allowing dynamic control of oscillator output.