CPPFXC7L-A7BR-24.0TS Equivalent & Substitute Parts

Part Overview

The CPPFXC7L-A7BR-24.0TS is a 24 MHz XO (Standard) CMOS oscillator manufactured by Cardinal Components Inc. as part of the FIPO™ CPPFX series. This surface mount crystal oscillator operates at 3.3V with enable/disable functionality and is housed in a 4-SMD, No Lead package. The device is Active status and widely used in applications requiring stable 24 MHz frequency generation with low power consumption capabilities.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, ensuring functional interchangeability in target applications.

Substiute Parts

CPPFXC7L-A7BR-24.0TS

Cardinal Components Inc.In Stock: 1250CPPFXC7L-A7BR-24.0TS Datasheet

Current PartRFQ

SXO75C3C481-24.000M

Suntsu Electronics, Inc.In Stock: 4429SXO75C3C481-24.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CPPFXC7L-A7BR-24.0TS is determined by strict alignment of the following critical parameters:

• Frequency: 24 MHz (exact match required)
• Output Type: CMOS
• Supply Voltage: 3.3V
• Function: Enable/Disable capability
• Frequency Stability: ±25ppm
• Operating Temperature Range: -40°C ~ 85°C
• Package Type: 4-SMD, No Lead
• Package Dimensions: 7.00mm x 5.00mm
• Mounting Type: Surface Mount
• RoHS Compliance: ROHS3 Compliant

The SXO75C3C481-24.000M from Suntsu Electronics, Inc. meets all substitution criteria across these parameters, qualifying as a direct equivalent part.

Parameter Comparison

Engineering Selection Recommendations

Both the CPPFXC7L-A7BR-24.0TS and SXO75C3C481-24.000M are Active status products with ROHS3 compliance and EAR99 ECCN classification. Selection between these parts should be based on:

Supply current requirements: The SXO75C3C481-24.000M operates at a maximum supply current of 16mA compared to 25mA for the main part, offering reduced power consumption in applications where this parameter is critical.

Physical height constraints: The SXO75C3C481-24.000M has a maximum seated height of 1.60mm versus 1.90mm for the CPPFXC7L-A7BR-24.0TS. Applications with tight vertical clearance specifications may benefit from the lower profile substitute.

Packaging format: The main part is supplied in Tape & Reel format, while the substitute is available in Bulk packaging. Procurement volume and assembly line requirements should guide packaging selection.

Both parts maintain identical electrical performance across frequency, stability, voltage, temperature range, and output characteristics.

Frequently Asked Questions (FAQ)

Q: Can the SXO75C3C481-24.000M directly replace the CPPFXC7L-A7BR-24.0TS on existing PCBs?

A: Yes. Both parts share identical package type (4-SMD, No Lead), dimensions (7.00mm x 5.00mm), and mounting type (Surface Mount). The footprint and pinout are compatible for direct PCB substitution.

Q: What are the key differences between these two oscillators?

A: The primary differences are supply current (16mA vs 25mA), seated height (1.60mm vs 1.90mm), and packaging format (Bulk vs Tape & Reel). All electrical specifications including frequency, stability, voltage, temperature range, and output type are identical.

Q: Are both parts RoHS compliant?

A: Yes. Both the CPPFXC7L-A7BR-24.0TS and SXO75C3C481-24.000M are ROHS3 compliant and REACH unaffected.

Q: Which part should be selected for low-power applications?

A: The SXO75C3C481-24.000M is the appropriate choice for applications prioritizing reduced power consumption, with a maximum supply current of 16mA compared to 25mA for the main part.

Q: Are there any temperature or frequency stability differences?

A: No. Both parts operate across the identical temperature range (-40°C ~ 85°C) and maintain the same frequency stability specification (±25ppm).

Q: What is the difference in packaging between these parts?

A: The CPPFXC7L-A7BR-24.0TS is supplied in Tape & Reel format, while the SXO75C3C481-24.000M is available in Bulk packaging. Selection depends on procurement volume and assembly requirements.