CPPC7L-BP-40.0TS Equivalent & Substitute Parts

Part Overview

The CPPC7L-BP-40.0TS is a 40 MHz crystal oscillator manufactured by Cardinal Components Inc. in the FIPO™ CPP series. This is a standard XO (crystal oscillator) with CMOS output, 3.3V supply voltage, and enable/disable functionality. The device is packaged in a 4-SMD, No Lead surface mount configuration with RoHS3 compliance and MSL 1 rating. The part is currently active in production with 632 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary manufacturer part is unavailable or when supply chain optimization is required.

Substiute Parts

CPPC7L-BP-40.0TS

Cardinal Components Inc.In Stock: 678CPPC7L-BP-40.0TS Datasheet

Current PartRFQ

SXO75C3A071-40.000M

Suntsu Electronics, Inc.In Stock: 1677SXO75C3A071-40.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The SXO75C3A071-40.000M from Suntsu Electronics, Inc. qualifies as a direct substitute based on the following critical parameters:

• Frequency: 40 MHz (exact match)
• Output Type: CMOS (exact match)
• Supply Voltage: 3.3V (exact match)
• Function: Enable/Disable (exact match)
• Frequency Stability: ±50ppm (exact match)
• Operating Temperature Range: 0°C ~ 70°C (exact match)
• Current - Supply (Max): 25mA (exact match)
• Package / Case: 4-SMD, No Lead (exact match)
• Size / Dimension: 0.276" L x 0.197" W (7.00mm x 5.00mm) (exact match)
• Mounting Type: Surface Mount (exact match)
• RoHS Status: ROHS3 Compliant (exact match)

All electrical and mechanical parameters align, confirming functional and physical interchangeability.

Parameter Comparison

Engineering Selection Recommendations

Both parts are active products with current manufacturing status. The CPPC7L-BP-40.0TS and SXO75C3A071-40.000M are electrically and mechanically equivalent. Selection between these parts should be based on availability, lead time, and packaging requirements. The Suntsu part features a lower seated height (0.063" vs 0.075"), which may provide a marginal advantage in space-constrained applications. Both parts maintain ROHS3 compliance and REACH unaffected status, meeting regulatory requirements for industrial and commercial applications.

Frequently Asked Questions (FAQ)

Q: Can the SXO75C3A071-40.000M directly replace the CPPC7L-BP-40.0TS in existing designs?

A: Yes. All critical electrical parameters (frequency, output type, supply voltage, function, stability, current draw, and temperature range) are identical. The physical package dimensions are also identical, ensuring PCB layout compatibility. The Suntsu part has a slightly lower seated height, which does not affect interchangeability.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and classified under the same ECCN (EAR99) and HTSUS codes.

Q: What is the difference in packaging between the two parts?

A: The CPPC7L-BP-40.0TS is supplied in Tape & Reel (TR) packaging, while the SXO75C3A071-40.000M is supplied in Bulk packaging. This affects handling and storage but does not impact electrical or mechanical performance.

Q: Are there any performance differences in frequency stability or current consumption?

A: No. Both parts specify ±50ppm frequency stability and 25mA maximum supply current. These parameters are identical and ensure equivalent performance in timing-critical applications.

Q: What is the significance of the height difference (0.075" vs 0.063")?

A: The Suntsu part is 0.012" (0.30mm) shorter when seated. This difference is negligible for most applications but may be relevant in designs with strict height constraints or where multiple components are stacked.