CPPC7L-A7BP-24.0TS Equivalent & Substitute Parts

Part Overview

The CPPC7L-A7BP-24.0TS is a 24 MHz XO (Standard) CMOS oscillator manufactured by Cardinal Components Inc. as part of the FIPO™ CPP series. This surface mount device operates at 3.3V with enable/disable functionality and is housed in a 4-SMD, No Lead package. The part is Active status and ROHS3 compliant. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory requirements necessitate alternative suppliers.

Substiute Parts

CPPC7L-A7BP-24.0TS

Cardinal Components Inc.In Stock: 884CPPC7L-A7BP-24.0TS Datasheet

Current PartRFQ

SXO75C3A481-24.000M

Suntsu Electronics, Inc.In Stock: 4142SXO75C3A481-24.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The SXO75C3A481-24.000M from Suntsu Electronics, Inc. qualifies as a direct substitute based on the following alignment of critical parameters:

• Identical frequency specification: 24 MHz
• Matching output type: CMOS
• Identical supply voltage: 3.3V
• Matching function: Enable/Disable
• Identical frequency stability: ±50ppm
• Identical operating temperature range: -40°C ~ 85°C
• Identical package configuration: 4-SMD, No Lead
• Identical physical footprint: 7.00mm x 5.00mm
• Matching compliance standards: ROHS3 Compliant, REACH Unaffected

Parameter Comparison

Engineering Selection Recommendations

Both parts meet identical functional and compliance requirements. The CPPC7L-A7BP-24.0TS and SXO75C3A481-24.000M are electrically and mechanically interchangeable for applications requiring a 24 MHz CMOS oscillator with 3.3V supply and enable/disable control. The SXO75C3A481-24.000M exhibits lower maximum supply current (16mA versus 25mA) and reduced seated height (1.60mm versus 1.90mm), which may provide advantages in power-constrained or space-limited designs. Both parts maintain ROHS3 compliance and REACH unaffected status, suitable for regulated applications.

Frequently Asked Questions (FAQ)

Q: Can the SXO75C3A481-24.000M be used as a direct replacement for the CPPC7L-A7BP-24.0TS?

A: Yes. Both oscillators share identical frequency, output type, supply voltage, function, frequency stability, operating temperature range, and package configuration. The physical footprint and pin configuration are equivalent, enabling direct PCB substitution.

Q: What are the differences between these two parts?

A: The primary differences are maximum supply current (SXO75C3A481-24.000M: 16mA versus CPPC7L-A7BP-24.0TS: 25mA) and seated height (SXO75C3A481-24.000M: 1.60mm versus CPPC7L-A7BP-24.0TS: 1.90mm). These differences do not affect functional compatibility in standard applications.

Q: Are both parts suitable for industrial temperature applications?

A: Yes. Both parts operate across the -40°C ~ 85°C temperature range, meeting industrial specifications.

Q: Do packaging differences affect substitution?

A: The CPPC7L-A7BP-24.0TS is supplied in Tape & Reel packaging, while the SXO75C3A481-24.000M is supplied in Bulk packaging. This affects procurement and handling but does not impact electrical or mechanical compatibility.

Q: Are both parts compliant with environmental regulations?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.