CPPC5LZ-BP-25.0TS Equivalent & Substitute Parts

Part Overview

The CPPC5LZ-BP-25.0TS is a 25 MHz XO (Standard) CMOS oscillator manufactured by Cardinal Components Inc. as part of the FIPO™ CPP series. This surface mount crystal oscillator operates at 3.3V with enable/disable functionality and is housed in a 4-SMD, No Lead package. The part is Active status and widely used in applications requiring stable 25 MHz clock generation with low power consumption capabilities.

Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable, while maintaining electrical and mechanical compatibility within the specified parameter tolerances.

Substiute Parts

CPPC5LZ-BP-25.0TS

Cardinal Components Inc.In Stock: 1019CPPC5LZ-BP-25.0TS Datasheet

Current PartRFQ

SXO53C3A071-25.000M

Suntsu Electronics, Inc.In Stock: 10350SXO53C3A071-25.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CPPC5LZ-BP-25.0TS are qualified based on the following critical parameters:

• Frequency: 25 MHz (exact match required)
• Output Type: CMOS (exact match required)
• Supply Voltage: 3.3V (exact match required)
• Function: Enable/Disable (exact match required)
• Frequency Stability: ±50ppm (exact match required)
• Operating Temperature Range: 0°C ~ 70°C (exact match required)
• Package Type: 4-SMD, No Lead (exact match required)
• Package Dimensions: 5.00mm x 3.20mm (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

The substitute part SXO53C3A071-25.000M from Suntsu Electronics, Inc. meets all critical electrical and mechanical parameters. Variations in current supply specifications and packaging format (Bulk vs. Tape & Reel) do not affect functional compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the CPPC5LZ-BP-25.0TS and SXO53C3A071-25.000M are Active status products with ROHS3 compliance and REACH Unaffected designation. Selection between these parts should be based on:

• Availability and lead time requirements
• Packaging format preference (Tape & Reel vs. Bulk)
• Supply current budget (SXO53C3A071-25.000M operates at lower maximum supply current of 16mA vs. 25mA)
• Height clearance constraints (SXO53C3A071-25.000M seated height is 1.40mm vs. 1.30mm)

Both parts are suitable for direct substitution in applications requiring 25 MHz CMOS oscillators with 3.3V supply and enable/disable functionality.

Frequently Asked Questions (FAQ)

Q: Can SXO53C3A071-25.000M be used as a direct replacement for CPPC5LZ-BP-25.0TS?

A: Yes. Both parts share identical electrical specifications (25 MHz, CMOS output, 3.3V supply, ±50ppm stability, enable/disable function) and mechanical compatibility (4-SMD No Lead package, 5.00mm x 3.20mm footprint). The 0.10mm difference in seated height and lower supply current of the Suntsu part do not affect circuit compatibility.

Q: What are the key parameters that determine substitution eligibility?

A: Frequency (25 MHz), output type (CMOS), supply voltage (3.3V), function (enable/disable), frequency stability (±50ppm), operating temperature range (0°C ~ 70°C), and package type (4-SMD, No Lead with 5.00mm x 3.20mm dimensions) must match exactly.

Q: Does packaging format affect compatibility?

A: Packaging format (Tape & Reel vs. Bulk) affects handling and storage procedures but does not affect electrical or mechanical compatibility. Component selection should consider manufacturing process requirements and inventory management practices.

Q: Are there compliance differences between these parts?

A: Both parts are ROHS3 compliant, REACH Unaffected, and classified as EAR99 for export control purposes. No compliance differences exist between the two parts.

Q: What is the significance of the current supply difference?

A: The SXO53C3A071-25.000M operates at a maximum supply current of 16mA compared to 25mA for the CPPC5LZ-BP-25.0TS. This lower current consumption may provide power efficiency benefits in battery-powered or power-constrained applications without affecting frequency or output characteristics.