CPPC4L-A7BR-96.0TS Equivalent & Substitute Parts

Part Overview

The CPPC4L-A7BR-96.0TS is a 96 MHz XO (Standard) CMOS oscillator manufactured by Cardinal Components Inc., part of the FIPO™ CPP series. This through-hole crystal oscillator operates at 3.3V with enable/disable functionality and is housed in an 8-DIP package. The product is currently obsolete, making equivalent substitute parts necessary for ongoing system support, maintenance, and legacy design continuity.

Substiute Parts

CPPC4L-A7BR-96.0TS

Cardinal Components Inc.In Stock: 801CPPC4L-A7BR-96.0TS Datasheet

Current PartRFQ

XLH736096.000000I

Renesas Electronics CorporationIn Stock: 1040XLH736096.000000I Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CPPC4L-A7BR-96.0TS is determined by the following critical parameters:

• Frequency Match: 96 MHz (exact)
• Supply Voltage: 3.3V (exact)
• Function: Enable/Disable capability (required)
• Frequency Stability: ±25ppm (exact)
• Operating Temperature Range: -40°C ~ 85°C (exact)
• Base Resonator Type: Crystal-based XO (Standard)

The substitute part XLH736096.000000I meets all electrical parameter requirements. However, it differs in mounting technology (surface mount vs. through hole) and output signal type (HCMOS vs. CMOS). These differences require evaluation based on circuit board design and signal integrity requirements.

Parameter Comparison

Engineering Selection Recommendations

Electrical Compatibility: The XLH736096.000000I is electrically compatible with the CPPC4L-A7BR-96.0TS. Both parts operate at identical frequency, voltage, stability, and temperature specifications. The HCMOS output is compatible with CMOS input receivers in standard logic applications.

Regulatory Compliance: Both parts meet RoHS requirements. The substitute part carries ROHS3 compliance, which supersedes the original RoHS Compliant designation. Both parts are rated MSL 1 (Unlimited moisture sensitivity level).

Physical Integration: The primary consideration is mounting technology. The original part uses through-hole mounting in an 8-DIP package, while the substitute uses surface-mount technology in a 6-SMD package. Board redesign or adapter solutions are required for direct substitution.

Power Consumption: The substitute part specifies a maximum supply current of 47mA compared to 25mA for the original. This difference must be evaluated against power budget constraints in the application circuit.

Frequently Asked Questions (FAQ)

Q: Can XLH736096.000000I directly replace CPPC4L-A7BR-96.0TS on existing PCBs?

A: No. The parts use different mounting technologies (through-hole vs. surface-mount) and package footprints. PCB redesign or mechanical adaptation is required.

Q: Are the frequency and stability specifications identical?

A: Yes. Both parts operate at 96 MHz with ±25ppm frequency stability across the -40°C ~ 85°C temperature range.

Q: What is the difference between CMOS and HCMOS output?

A: HCMOS (High-speed CMOS) is a variant of CMOS logic with improved speed characteristics. HCMOS outputs are compatible with standard CMOS inputs in typical applications.

Q: Does the higher current consumption of the substitute part affect compatibility?

A: The substitute part draws 47mA maximum compared to 25mA for the original. Applications must confirm that power supply and current delivery capacity can accommodate this increase.

Q: Are both parts RoHS compliant?

A: Yes. The original part is RoHS Compliant, and the substitute is ROHS3 Compliant. Both meet environmental compliance requirements.

Q: What is MSL 1 rating?

A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life with no special moisture control requirements during storage or handling.