CPF0201B110RE Equivalent & Substitute Parts

Part Overview

The CPF0201B110RE is a 110 Ohms thin film chip resistor manufactured by TE Connectivity Passive Product in the 0201 (0603 Metric) package format. This component is rated at ±0.1% tolerance with a temperature coefficient of ±25ppm/°C and operates across the temperature range of -55°C to 155°C. The part is currently in active production status and is ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when inventory requirements necessitate alternative procurement channels.

Substiute Parts

CPF0201B110RE

TE Connectivity Passive ProductIn Stock: 1020CPF0201B110RE Datasheet

Current PartRFQ

CPF0201B110RE1

TE Connectivity Passive ProductIn Stock: 2760CPF0201B110RE1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CPF0201B110RE is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 110 Ohms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Power rating: 0.03W, 1/32W (exact match required)
• Temperature coefficient: ±25ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)

Mechanical Parameters:

• Package / Case: 0201 (0603 Metric) (exact match required)
• Physical dimensions: 0.023" L x 0.011" W (0.58mm x 0.29mm) (exact match required)
• Height - Seated (Max): 0.011" (0.28mm) (exact match required)
• Number of terminations: 2 (exact match required)

Compliance Parameters:

• Composition: Thin Film (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

The substitute part CPF0201B110RE1 meets all electrical, mechanical, and compliance requirements for direct substitution with the primary part number.

Parameter Comparison

Engineering Selection Recommendations

Both CPF0201B110RE and CPF0201B110RE1 are active production components manufactured by TE Connectivity Passive Product with identical electrical, mechanical, and compliance specifications. Selection between these part numbers is based on inventory availability and procurement requirements rather than technical performance differences.

The CPF0201B110RE1 substitute part carries REACH Unaffected status, whereas the primary part number CPF0201B110RE lists REACH Status as Vendor Undefined. Both components maintain ROHS3 compliance and EAR99 export classification. The substitute part currently maintains higher inventory levels (2736 Pcs) compared to the primary part number (987 Pcs), which may influence procurement decisions for high-volume applications.

Frequently Asked Questions (FAQ)

Q: Can CPF0201B110RE1 be used as a direct replacement for CPF0201B110RE?

A: Yes. CPF0201B110RE1 is a direct substitute with identical electrical specifications (110 Ohms, ±0.1% tolerance, ±25ppm/°C temperature coefficient), identical power rating (0.03W, 1/32W), identical mechanical package (0201 / 0603 Metric), and identical compliance certifications (ROHS3, MSL 1).

Q: Are there any differences in physical dimensions between these parts?

A: No. Both parts share identical dimensions: 0.023" L x 0.011" W (0.58mm x 0.29mm) with maximum seated height of 0.011" (0.28mm). They are mechanically interchangeable in all PCB layouts and assembly processes.

Q: Do both parts meet the same environmental and compliance standards?

A: Both parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. Both carry EAR99 export classification and share the same HTSUS code (8533.21.0030). The substitute part CPF0201B110RE1 specifies REACH Unaffected status, while the primary part lists REACH Status as Vendor Undefined.

Q: What is the difference between the part numbers if the specifications are identical?

A: The part numbers differ in their reel quantity designations. CPF0201B110RE indicates a 10K reel quantity, while CPF0201B110RE1 indicates a 1K reel quantity. This distinction affects packaging and procurement quantities but does not impact component performance or compatibility.

Q: Can these parts be used in high-precision applications?

A: Both parts are thin film resistors with ±0.1% tolerance and ±25ppm/°C temperature coefficient, making them suitable for precision applications requiring tight tolerance control across the operating temperature range of -55°C to 155°C.

Q: Are there any soldering or assembly considerations specific to the 0201 package?

A: Both parts use the 0201 (0603 Metric) package with identical physical dimensions and two terminations. Assembly and soldering processes are identical for both part numbers. Standard SMD assembly equipment and reflow profiles for 0201 components apply to both parts.