CPCP10100R0JB32 Equivalent & Substitute Parts

Part Overview

The CPCP10100R0JB32 is a 100 Ohm, 10W wirewound through-hole resistor manufactured by Vishay Dale. This radial flame-proof, safety-rated component is designed for applications requiring high power dissipation with tight tolerance specifications. The part is currently active in production with 865 units in stock. Substitute parts are identified when inventory constraints, compliance requirements, or procurement lead times necessitate alternative sourcing while maintaining identical electrical and mechanical performance.

Substiute Parts

CPCP10100R0JB32

Vishay DaleIn Stock: 968CPCP10100R0JB32 Datasheet

Current PartRFQ

CPCP10100R0JE32

Vishay DaleIn Stock: 852CPCP10100R0JE32 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CPCP10100R0JB32 are identified based on strict parametric equivalence across the following critical criteria:

• Resistance value: 100 Ohms
• Tolerance: ±5%
• Power rating: 10W
• Composition: Wirewound
• Package configuration: Radial
• Temperature coefficient: ±20ppm/°C
• Operating temperature range: -65°C to 275°C
• Physical dimensions and height specifications
• Number of terminations: 2
• Features: Flame Proof, Safety

The CPCP10100R0JE32 meets all parametric requirements for direct substitution. Both parts are manufactured by Vishay Dale within the CPCP series and share identical electrical specifications and mechanical form factors.

Parameter Comparison

Engineering Selection Recommendations

Both the CPCP10100R0JB32 and CPCP10100R0JE32 are functionally equivalent for applications requiring 100 Ohm, 10W wirewound resistors with radial configuration and flame-proof safety features.

The primary distinction between these parts is RoHS compliance status. The CPCP10100R0JE32 is ROHS3 compliant, while the CPCP10100R0JB32 is RoHS non-compliant. Selection between these parts should be determined by the regulatory and compliance requirements of the end application and target market.

Both parts maintain identical electrical performance, mechanical dimensions, and thermal characteristics. Inventory availability differs slightly, with the CPCP10100R0JB32 currently stocked at 865 units and the CPCP10100R0JE32 at 788 units.

Frequently Asked Questions (FAQ)

Q: Can CPCP10100R0JE32 be used as a direct replacement for CPCP10100R0JB32?

A: Yes. Both parts are parametrically equivalent across all electrical and mechanical specifications, including resistance value, tolerance, power rating, temperature coefficient, operating temperature range, physical dimensions, and package configuration. The parts are interchangeable from a functional standpoint.

Q: What is the difference between these two part numbers?

A: The primary difference is RoHS compliance certification. The CPCP10100R0JE32 is ROHS3 compliant, while the CPCP10100R0JB32 is RoHS non-compliant. All other electrical and mechanical parameters are identical.

Q: Are the physical dimensions identical?

A: Yes. Both parts share identical dimensions of 0.633" L x 0.485" W (16.08mm x 12.32mm) with a maximum seated height of 1.372" (34.85mm). They are mechanically interchangeable in PCB layouts and through-hole applications.

Q: Do these parts have the same temperature operating range?

A: Yes. Both the CPCP10100R0JB32 and CPCP10100R0JE32 operate across the same temperature range of -65°C to 275°C with an identical temperature coefficient of ±20ppm/°C.

Q: Which part should I select for RoHS-regulated applications?

A: The CPCP10100R0JE32 is ROHS3 compliant and should be selected for applications subject to RoHS directives or customer requirements mandating RoHS compliance.