CPCL10GH Pressure Sensor Equivalent & Substitute Parts

Part Overview

The CPCL10GH is a vented gauge pressure sensor manufactured by Honeywell Sensing and Productivity Solutions, designed for board mount applications requiring low-pressure measurement. This 4-SIP module sensor outputs 0 mV to 20 mV at 12V supply voltage with ±2% accuracy across an operating range of -25°C to 85°C. The product is currently obsolete, necessitating identification of equivalent and substitute components for ongoing system support and new designs.

Substiute Parts

CPCL10GH

Honeywell Sensing and Productivity SolutionsIn Stock: 1100CPCL10GH Datasheet

Current PartRFQ

TSCSNNN001PGUCV

Honeywell Sensing and Productivity SolutionsIn Stock: 849TSCSNNN001PGUCV Datasheet

SimilarRFQ

10 INCH-G-HGRADE-MINI

Amphenol All Sensors CorporationIn Stock: 96710 INCH-G-HGRADE-MINI Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CPCL10GH are identified based on the following critical parameters that determine functional compatibility:

Primary Matching Criteria:

• Pressure Type: Vented Gauge
• Output Type: Wheatstone Bridge
• Package / Case: 4-SIP Module
• Mounting Type: Through Hole
• Operating Pressure Range: 0.36 PSI nominal
• Temperature Compensation: Required
• Output Range: 0 mV ~ 20 mV nominal

Substitution Categories:

Direct Equivalent (Identical Specifications): The 10 INCH-G-HGRADE-MINI from Amphenol All Sensors Corporation matches the CPCL10GH across all critical electrical and mechanical parameters, including operating pressure (0.36 PSI), output range (0 mV ~ 20 mV at 12V), package type (4-SIP Module), and temperature compensation. This part is currently active in production.

Similar Functional Substitute (Different Pressure Rating): The TSCSNNN001PGUCV from Honeywell Sensing and Productivity Solutions operates at a higher nominal pressure (1 PSI) with different output characteristics (0 mV ~ 7.5 mV at 5V). This part shares the same package type, output type, and temperature compensation features but requires circuit-level evaluation due to pressure and voltage differences.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Preferred):

The 10 INCH-G-HGRADE-MINI is the direct equivalent for the obsolete CPCL10GH. Both parts share identical operating pressure (0.36 PSI), output range (0 mV ~ 20 mV at 12V), package configuration (4-SIP Module), and temperature operating range (-25°C ~ 85°C). The 10 INCH-G-HGRADE-MINI offers improved accuracy (±0.5% versus ±2%) and is currently in active production with 937 units in stock.

Note: The 10 INCH-G-HGRADE-MINI is RoHS non-compliant, whereas the CPCL10GH is RoHS compliant. Applications requiring RoHS compliance must evaluate this difference against regulatory requirements.

For Alternative Selection (Circuit Redesign Required):

The TSCSNNN001PGUCV from Honeywell's TruStability® TSC series is a functional alternative when system redesign is acceptable. This part operates at a higher nominal pressure (1 PSI) with different output characteristics (0 mV ~ 7.5 mV at 5V supply). The TSCSNNN001PGUCV provides superior accuracy (±0.2%), extended temperature range (-40°C ~ 85°C), and RoHS compliance. Implementation requires signal conditioning circuit modifications to accommodate the lower output voltage and different supply voltage range (1.5V ~ 12V).

Compliance Considerations:

• CPCL10GH: RoHS Compliant
• 10 INCH-G-HGRADE-MINI: RoHS Non-compliant
• TSCSNNN001PGUCV: RoHS Compliant

All three parts are classified as EAR99 and fall under HTSUS code 9026.20.4000.

Frequently Asked Questions (FAQ)

Q: Can the 10 INCH-G-HGRADE-MINI be used as a direct drop-in replacement for the CPCL10GH?

A: Yes. Both parts share identical operating pressure (0.36 PSI), output range (0 mV ~ 20 mV at 12V), 4-SIP package configuration, and temperature compensation. Pin-to-pin compatibility and electrical performance are equivalent. The primary consideration is RoHS compliance status: the 10 INCH-G-HGRADE-MINI is RoHS non-compliant while the CPCL10GH is RoHS compliant.

Q: What are the key differences between the CPCL10GH and TSCSNNN001PGUCV?

A: The TSCSNNN001PGUCV operates at a higher nominal pressure (1 PSI versus 0.36 PSI) and produces a lower output voltage (0 mV ~ 7.5 mV at 5V versus 0 mV ~ 20 mV at 12V). The TSCSNNN001PGUCV offers superior accuracy (±0.2% versus ±2%) and extended low-temperature operation (-40°C versus -25°C). Direct substitution requires signal conditioning circuit modifications.

Q: Are all three parts available in the same 4-SIP package?

A: Yes. The CPCL10GH, 10 INCH-G-HGRADE-MINI, and TSCSNNN001PGUCV are all packaged as 4-SIP modules with through-hole mounting. Physical footprint compatibility is confirmed across all three parts.

Q: Which substitute part should be selected for new designs?

A: For new designs requiring identical electrical specifications to the obsolete CPCL10GH, the 10 INCH-G-HGRADE-MINI is the appropriate choice. For applications where improved accuracy and RoHS compliance are priorities, the TSCSNNN001PGUCV is suitable provided circuit-level modifications are implemented to accommodate its different output voltage and supply voltage range.

Q: What is the inventory status of these parts?

A: CPCL10GH: 1006 units in stock (obsolete status). 10 INCH-G-HGRADE-MINI: 937 units in stock (active). TSCSNNN001PGUCV: 802 units in stock (active).

Q: Do all parts support temperature compensation?

A: Yes. Temperature compensation is a standard feature across the CPCL10GH, 10 INCH-G-HGRADE-MINI, and TSCSNNN001PGUCV, ensuring stable output across the specified operating temperature ranges.