CPC60GH Equivalent & Substitute Parts Reference

Part Overview

The CPC60GH is a pressure sensor manufactured by Honeywell Sensing and Productivity Solutions, designed for board mount applications requiring vented gauge pressure measurement at 60 PSI (413.69 kPa). This component operates with a Wheatstone Bridge output configuration and delivers 0 mV to 90 mV output at 12V supply voltage.

The CPC60GH is classified as obsolete. Identifying equivalent and substitute parts is necessary to support ongoing maintenance, repair, and new design requirements where this component is no longer available from primary sources. Substitute parts must maintain functional compatibility within the specified pressure range, output characteristics, and physical form factor.

Substiute Parts

CPC60GH

Honeywell Sensing and Productivity SolutionsIn Stock: 746CPC60GH Datasheet

Current PartRFQ

TSCSNNN060PGUCV

Honeywell Sensing and Productivity SolutionsIn Stock: 1085TSCSNNN060PGUCV Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CPC60GH are identified based on the following critical parameters that determine functional compatibility:

Primary Compatibility Criteria:

• Operating Pressure: 60 PSI (413.69 kPa) nominal rating
• Pressure Type: Vented Gauge configuration
• Output Type: Wheatstone Bridge
• Package / Case: 4-SIP Module form factor
• Mounting Type: Through Hole
• Termination Style: PC Pin

Secondary Compatibility Considerations:

• Supply voltage range overlap with CPC60GH (3V ~ 16V)
• Temperature compensated design
• RoHS compliance status
• Moisture sensitivity level (MSL 1)

The TSCSNNN060PGUCV meets all primary compatibility criteria. While this substitute exhibits different output voltage characteristics (0 mV ~ 30 mV at 5V versus 0 mV ~ 90 mV at 12V), both sensors operate within overlapping supply voltage ranges and deliver proportional output signals suitable for bridge-based measurement circuits. The substitute part maintains the same physical package, mounting method, and pressure measurement range.

Parameter Comparison

Engineering Selection Recommendations

For Direct Substitution:

The TSCSNNN060PGUCV is suitable as a substitute for the CPC60GH in applications where the following conditions are met:

1. The measurement circuit can accommodate the different output voltage scaling (0 mV ~ 30 mV versus 0 mV ~ 90 mV). Signal conditioning or amplification may be required depending on downstream analog-to-digital converter input ranges.

2. The operating supply voltage is within the overlapping range of 3V to 12V. If the original design operates at 16V, the substitute cannot be used without circuit modification.

3. The application does not require overpressure protection beyond 145 PSI. The CPC60GH provides overpressure rating to 180 PSI.

4. The extended low-temperature operating range of the TSCSNNN060PGUCV (-40°C versus -25°C) is acceptable or beneficial for the application.

Compliance Considerations:

Both parts are RoHS compliant and carry MSL 1 (Unlimited) moisture sensitivity rating, indicating equivalent handling and storage requirements. The TSCSNNN060PGUCV is an active product with current manufacturing support, whereas the CPC60GH is obsolete. Selection of the active substitute part ensures long-term component availability and supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can the TSCSNNN060PGUCV be used as a direct pin-for-pin replacement for the CPC60GH?

A: Both parts use 4-SIP Module packaging with PC Pin termination and identical through-hole mounting. Physical installation is compatible. However, the output voltage scaling differs (0 mV ~ 30 mV versus 0 mV ~ 90 mV), requiring signal conditioning circuit adjustments to maintain proper measurement accuracy.

Q: What is the key difference in output characteristics between these two sensors?

A: The CPC60GH outputs 0 mV to 90 mV at 12V supply, while the TSCSNNN060PGUCV outputs 0 mV to 30 mV at 5V supply. Both deliver proportional Wheatstone Bridge output for the same 60 PSI pressure range. The substitute part has lower absolute voltage output but higher accuracy (±0.15% versus ±2%).

Q: Are there supply voltage compatibility issues?

A: The CPC60GH operates at 3V to 16V; the TSCSNNN060PGUCV operates at 1.5V to 12V. The overlapping range is 3V to 12V. If the original circuit supplies 16V, the substitute cannot be used without voltage regulation.

Q: Does the TSCSNNN060PGUCV provide better performance than the CPC60GH?

A: The substitute offers improved accuracy (±0.15% versus ±2%) and extended low-temperature operation (-40°C versus -25°C). However, the CPC60GH has a higher maximum pressure rating (180 PSI versus 145 PSI). Selection depends on application-specific requirements.

Q: Is the TSCSNNN060PGUCV currently available?

A: Yes. The TSCSNNN060PGUCV is classified as an active product with current manufacturing support. The CPC60GH is obsolete and no longer produced.

Q: What certifications and compliance standards apply to both parts?

A: Both the CPC60GH and TSCSNNN060PGUCV are RoHS compliant, carry MSL 1 (Unlimited) moisture sensitivity rating, and are classified under ECCN EAR99 and HTSUS 9026.20.4000.