CPC5710N Equivalent & Substitute Parts

Part Overview

The CPC5710N is a Telecom Interface IC functioning as a Phone Line Monitor (PLM) in an 8-SOIC surface mount package. Manufactured by IXYS Integrated Circuits Division under the LITELINK® series, this component is classified as obsolete. Due to its discontinued status, identifying equivalent substitute parts is essential for maintaining system compatibility in legacy telecom applications and ensuring continued availability for production and repair operations.

Substiute Parts

CPC5710N

IXYS Integrated Circuits DivisionIn Stock: 12211CPC5710N Datasheet

Current PartRFQ

CPC5710NTR

IXYS Integrated Circuits DivisionIn Stock: 6875CPC5710NTR Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CPC5710N are identified based on strict equivalence across the following critical parameters:

• Functional Equivalence: Phone Line Monitor (PLM) function within the LITELINK® series
• Electrical Specifications: Identical supply voltage range (3V ~ 5.5V), current draw (10mA), and power dissipation (300 mW)
• Package Compatibility: 8-SOIC surface mount package with matching physical dimensions (0.154", 3.90mm Width)
• Operating Range: Identical temperature range (-40°C ~ 85°C)
• Compliance Standards: ROHS3 compliance and MSL Level 1 rating maintained

The CPC5710NTR qualifies as a direct substitute based on complete alignment with these parameters. The primary distinction is packaging format: CPC5710NTR is supplied in Tape & Reel (TR) configuration, whereas CPC5710N uses standard packaging.

Parameter Comparison

Engineering Selection Recommendations

Both CPC5710N and CPC5710NTR maintain identical electrical and mechanical specifications, ensuring direct interchangeability in circuit applications. Selection between these parts should be based on procurement and assembly requirements:

CPC5710N is suitable for applications requiring standard packaging formats with moderate volume requirements.

CPC5710NTR is specified for high-volume production environments utilizing automated pick-and-place assembly equipment, as Tape & Reel packaging optimizes handling and reduces manual intervention.

Both parts maintain ROHS3 compliance and MSL Level 1 rating, confirming suitability for standard manufacturing and storage conditions. The obsolete status of both variants necessitates verification of current inventory availability through authorized distributors prior to design finalization.

Frequently Asked Questions (FAQ)

Q: Can CPC5710NTR be used as a direct replacement for CPC5710N?

A: Yes. Both parts are electrically and mechanically identical. The CPC5710NTR differs only in packaging format (Tape & Reel versus standard packaging). Pin configuration, electrical performance, and thermal characteristics are equivalent.

Q: What is the significance of the "TR" designation in CPC5710NTR?

A: The "TR" suffix indicates Tape & Reel packaging, a standard format for automated assembly processes. This packaging method does not affect component functionality or electrical performance.

Q: Are there any compliance or certification differences between these parts?

A: No. Both CPC5710N and CPC5710NTR carry identical ROHS3 compliance status and MSL Level 1 rating. Regulatory and environmental certifications are equivalent.

Q: What should be considered when selecting between these substitute parts?

A: Selection depends on assembly methodology and volume requirements. Standard packaging (CPC5710N) suits lower-volume or manual assembly operations. Tape & Reel packaging (CPC5710NTR) is optimized for automated production environments. Verify current inventory availability with distributors, as both parts are obsolete.

Q: Are the pin configurations identical between CPC5710N and CPC5710NTR?

A: Yes. Both parts use the 8-SOIC package with identical pin assignments and electrical connections. No PCB layout modifications are required when substituting between these parts.