CP2-SA110-1-FJ Equivalent & Substitute Parts

Part Overview

The CP2-SA110-1-FJ is a 110-position receptacle connector manufactured by 3M, part of the MetPak™ CP2 series. This backplane connector features female sockets with 0.079" (2.00mm) pitch, press-fit termination, and right-angle through-hole mounting. The connector is designed for CompactPCI applications and maintains an active product status with full RoHS compliance. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, supply chain considerations, or design flexibility within the allowed parameter range.

Substiute Parts

CP2-SA110-1-FJ

3MIn Stock: 935CP2-SA110-1-FJ Datasheet

Current PartRFQ

5100147-9

TE Connectivity AMP ConnectorsIn Stock: 12375100147-9 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CP2-SA110-1-FJ is determined by strict alignment of the following critical parameters:

• Connector type: Receptacle with female sockets
• Position count: 110 positions
• Pitch specification: 0.079" (2.00mm)
• Row configuration: 5 rows
• Mounting configuration: Through hole, right angle orientation
• Termination method: Press-fit
• Contact material finish: Gold plating
• Operating temperature range: -55°C ~ 125°C minimum
• Compliance status: RoHS compliant

The substitute part 5100147-9 (TE Connectivity AMP Connectors, Z-PACK series) meets all critical substitution criteria. Both connectors share identical position count, pitch, row configuration, mounting type, termination method, contact finish material, and operating temperature specifications. Both maintain RoHS compliance and MSL Level 1 rating.

Parameter Comparison

Engineering Selection Recommendations

Both the CP2-SA110-1-FJ and 5100147-9 are active products with full RoHS compliance and MSL Level 1 rating, making either suitable for new designs and production applications. The primary distinction lies in contact finish thickness: the 5100147-9 provides 30.0µin (0.76µm) gold plating compared to 10.0µin (0.25µm) on the CP2-SA110-1-FJ. The increased contact finish thickness on the TE Connectivity part may provide enhanced durability in high-cycle mating applications. Both connectors support identical electrical and thermal operating parameters and maintain press-fit termination compatibility. Selection between these parts should be based on availability, packaging requirements (bulk versus tube), and specific application mating cycle expectations.

Frequently Asked Questions (FAQ)

Q: Can the 5100147-9 directly replace the CP2-SA110-1-FJ in existing designs?

A: Yes. Both connectors share identical position count (110), pitch (0.079"), row configuration (5), mounting type (through hole, right angle), termination method (press-fit), and operating temperature range (-55°C ~ 125°C). Both are RoHS compliant with MSL Level 1 rating.

Q: What is the difference in mounting configuration between these parts?

A: The CP2-SA110-1-FJ is specified as through-hole, right-angle mounting. The 5100147-9 is specified as board edge, through-hole, right-angle mounting. Both support right-angle through-hole PCB installation.

Q: How do the contact finish specifications differ?

A: The CP2-SA110-1-FJ features 10.0µin (0.25µm) gold plating, while the 5100147-9 features 30.0µin (0.76µm) gold plating. The thicker plating on the TE Connectivity part may extend contact life in applications with frequent mating cycles.

Q: Are there packaging differences between these connectors?

A: Yes. The CP2-SA110-1-FJ is supplied in bulk packaging, while the 5100147-9 is supplied in tube packaging. Packaging selection should align with production workflow and inventory management requirements.

Q: Do both connectors support the same voltage and current specifications?

A: The CP2-SA110-1-FJ does not specify voltage or current ratings in the provided data. The 5100147-9 is rated for 1.5 A at 500Vrms. Verify application requirements against the 5100147-9 specifications if electrical performance data is critical to your design.

Q: Are both connectors suitable for CompactPCI applications?

A: The CP2-SA110-1-FJ is explicitly designated for CompactPCI usage. The 5100147-9 does not specify connector usage in the provided data. Confirm compatibility with your specific CompactPCI implementation requirements.