CONSMA013.062-G SMA Male Board Edge Coaxial Connector

Part Overview

The CONSMA013.062-G is an SMA male board edge coaxial connector manufactured by TE Connectivity Linx. This connector is designed for end-launch, panel mount applications with solder termination for both contact and shield. The part operates at 50 Ohms impedance with a maximum frequency rating of 18 GHz and is suitable for RF applications requiring board edge mounting at 0.062" thickness. The product is currently active and available in stock with 797 pieces in inventory. Alternative equivalent parts may be required when board thickness specifications differ from the primary mounting dimension.

Substiute Parts

CONSMA013.062-G

TE Connectivity LinxIn Stock: 827CONSMA013.062-G Datasheet

Current PartRFQ

CONSMA013.031-G

TE Connectivity LinxIn Stock: 1533CONSMA013.031-G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CONSMA013.062-G is determined by equivalence across the following critical parameters:

Electrical Parameters (Non-Negotiable):

• Connector Style: SMA
• Connector Type: Plug, Male Pin
• Impedance: 50 Ohms
• Frequency - Max: 18 GHz
• Voltage Rating: 1000 V

Mechanical Parameters (Non-Negotiable):

• Mounting Type: Board Edge, End Launch; Panel Mount
• Contact Termination: Solder
• Shield Termination: Solder
• Fastening Type: Threaded

Environmental & Compliance Parameters:

• Operating Temperature: -55°C ~ 155°C
• Mating Cycles: 500
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Variable Parameter (Substitution Basis):

• Board Thickness Mounting Dimension: 0.062"

The CONSMA013.031-G serves as a parametric equivalent with identical electrical, mechanical, and environmental specifications. The primary difference is the board thickness mounting dimension (0.031" versus 0.062"), making it suitable for applications requiring thinner PCB edge mounting while maintaining full electrical and mechanical compatibility within the SMA connector family.

Parameter Comparison

Engineering Selection Recommendations

Both the CONSMA013.062-G and CONSMA013.031-G are active products with ROHS3 compliance and REACH unaffected status. Selection between these parts is determined solely by PCB board thickness requirements:

Select CONSMA013.062-G when:

• PCB board edge thickness is 0.062"
• Application requires standard thickness board edge mounting

Select CONSMA013.031-G when:

• PCB board edge thickness is 0.031"
• Application requires thin board edge mounting
• Higher inventory availability is a consideration (1481 pieces in stock versus 797 pieces)

Both connectors maintain identical electrical performance, frequency response, impedance characteristics, and environmental operating ranges. The substitution is purely mechanical, based on the specific board thickness dimension required for the application.

Frequently Asked Questions (FAQ)

Q: Can CONSMA013.031-G be used as a direct replacement for CONSMA013.062-G?

A: The CONSMA013.031-G is electrically and mechanically equivalent to the CONSMA013.062-G. However, it is designed for 0.031" board thickness rather than 0.062" board thickness. Direct substitution is only appropriate if the PCB edge thickness matches the connector's mounting dimension specification.

Q: What is the primary difference between these two connector models?

A: The only difference is the board thickness mounting dimension. CONSMA013.062-G accommodates 0.062" thick PCB edges, while CONSMA013.031-G accommodates 0.031" thick PCB edges. All other electrical, mechanical, and environmental specifications are identical.

Q: Are both parts RoHS compliant?

A: Yes, both CONSMA013.062-G and CONSMA013.031-G are ROHS3 compliant and REACH unaffected.

Q: What is the maximum operating frequency for these connectors?

A: Both connectors support a maximum frequency of 18 GHz with 50 Ohms impedance.

Q: What termination method is used for these connectors?

A: Both the center contact and shield use solder termination. These are end-launch, board edge mounted connectors suitable for panel mount applications.

Q: What is the operating temperature range?

A: Both connectors operate across -55°C to 155°C, providing wide temperature range support for industrial and aerospace applications.

Q: How many mating cycles are these connectors rated for?

A: Both connectors are rated for 500 mating cycles.

Q: What is the voltage rating?

A: Both connectors are rated for 1000 V.